Haya U.K ltd have started looking at possibly adding a new model to there range.
#26
Thread Starter
Hi Mal, after checking with Andrew I am sorry to confirm that BB’s and a smoking barrel are not compatible. However you do have a 6v supply for a camera that could be used to power a uv bulb to get your glow in the dark BB’s illuminating.
#27
Join Date: Nov 2010
Location: HamiltonWaikato, NEW ZEALAND
Posts: 937
Likes: 0
Received 78 Likes
on
55 Posts
Hi Tankman
Cool, Was thinking about barrel smoke for my Cent as an alternative - has no BB system - unfortunately it's the 20 pdr Type A Barrel - without fume extractor - so the post shot smoke plume would just be wrong.
6V? Will need a serious resistor then.
Thanks
Mal
Cool, Was thinking about barrel smoke for my Cent as an alternative - has no BB system - unfortunately it's the 20 pdr Type A Barrel - without fume extractor - so the post shot smoke plume would just be wrong.
6V? Will need a serious resistor then.
Thanks
Mal
#28
Thread Starter
You got that right Mal, it will need a big resistor, or you could go for one of these.
https://www.ebay.com/itm/5-x-Pre-wir...75.c100623.m-1
might save you some time and effort. All the best for now.
Alan
https://www.ebay.com/itm/5-x-Pre-wir...75.c100623.m-1
might save you some time and effort. All the best for now.
Alan
#31
Tongde Centurian Mk.5
Well that didn't take long. Looks like Haya lost their exclusive?
#32
Join Date: Nov 2010
Location: HamiltonWaikato, NEW ZEALAND
Posts: 937
Likes: 0
Received 78 Likes
on
55 Posts
That's not good news for Haya. Detail around the turret mantlet is quite different, different lights, bush bar over the gunners sight, and either their assembly guy can't read the instructions or the instructions are off in regard to the deflector at the rear - it's upside down. And no, neither the Aussies nor Kiwi's did it that way in case you think it's a down under thing.
Noticed something else, Tongde Mk 5 is missing Tow/Lifting eyes & Clevis from Bow, though holes for them are there - missed on assembly?
Present pics are bit too limited for further comment
Mal
Tongde Mk 5 - Lights, Gunners sight bush bar
Tongde Mk 5 - Upside down deflector
Tongde Mk 5 - RH Side
Haya Mk 3 - Mantlet surround detail, No Bush bar over gunners sight
Haya Mk 3 - Full width deflector plate in correct position
Hay Mk 3 RH Side
Haya Mk 3 - Towing eyes & Clevis on bow - missing from Tongde Mk5
Noticed something else, Tongde Mk 5 is missing Tow/Lifting eyes & Clevis from Bow, though holes for them are there - missed on assembly?
Present pics are bit too limited for further comment
Mal
Tongde Mk 5 - Lights, Gunners sight bush bar
Tongde Mk 5 - Upside down deflector
Tongde Mk 5 - RH Side
Haya Mk 3 - Mantlet surround detail, No Bush bar over gunners sight
Haya Mk 3 - Full width deflector plate in correct position
Hay Mk 3 RH Side
Haya Mk 3 - Towing eyes & Clevis on bow - missing from Tongde Mk5
Last edited by afv aficionado; 06-23-2022 at 03:29 PM.
#33
Maybe it's just a case of a cheap knockoff of the Tamiya...very cheap.
#34
Considering Tamiya showed their Centurion in late November 2021 and only started shipping early this year, it would be an impressive feat of reverse engineering to produce a knock-off, while at least making some changes on the front glacis stowage and lighting configuration.
#35
New RC Tank Manufacturer / Brand
I have been in contact with Tongde & they are a bonafide manufacturer of die cast models & about to launch their own RC tank series. They have no relation to Haya or anyone else in the market & from what I have been seen, this will be very good news for the hobby. This is no FB scam as some were posted over on Zuckerberg's god-forsaken place. Good things are about to happen so stay tuned.
#36
Its not a knockoff.
Considering Tamiya showed their Centurion in late November 2021 and only started shipping early this year, it would be an impressive feat of reverse engineering to produce a knock-off, while at least making some changes on the front glacis stowage and lighting configuration.
The following users liked this post:
herrmill (06-24-2022)
#39
#40
Got it. As an English speaker, I sometimes like to use words from other languages to make myself look very cool and very important. Haha
Until now my favorite has always been "Jefe", which is Spanish for laoban.
Until now my favorite has always been "Jefe", which is Spanish for laoban.
The following users liked this post:
herrmill (06-24-2022)
#41
Me bad. Typing as I was driving. But we all know who the ultimate boss is here. Its the LAOBANA which is my version of Chinese + Spanish to show the lady is always the boss since they control the finances here.
Confuses the hell out of my local friends when I see the lady boss.
Confuses the hell out of my local friends when I see the lady boss.
#42
Way back when my mom worked for a logistics company and she had a plaque on her desk that I thought was pretty cool, it said, Do you want the man in charge, or the woman who knows what's going on?
The following users liked this post:
herrmill (06-24-2022)
#44
Me bad. Typing as I was driving. But we all know who the ultimate boss is here. Its the LAOBANA which is my version of Chinese + Spanish to show the lady is always the boss since they control the finances here.
Confuses the hell out of my local friends when I see the lady boss.
Confuses the hell out of my local friends when I see the lady boss.
The following users liked this post:
herrmill (06-24-2022)
#46
Surprised TD posted that. Yes, M60 also in the works & will be offered in 3 levels up to & including all metal.
No 3DP parts here - all ABS injection.
As I mentioned above, this could well be a good supplier but until I see a sample & compare to what's in the market, am going to hold off commenting. I will have to say one more thing... at least they know what the Bosch headlamp looks like.
No 3DP parts here - all ABS injection.
As I mentioned above, this could well be a good supplier but until I see a sample & compare to what's in the market, am going to hold off commenting. I will have to say one more thing... at least they know what the Bosch headlamp looks like.
Last edited by herrmill; 06-24-2022 at 02:12 PM.
#48
Well its about darn time. Sign me up. How much, when's it ready and who do I throw money at?
Sadly I think Haya has moved too slowly for the market and it is filling its own holes now.
Sadly I think Haya has moved too slowly for the market and it is filling its own holes now.