Heng Long Releasing 1/16 King Tiger
#1
Senior Member
Thread Starter
Join Date: Jan 2005
Location: Auckland, NEW ZEALAND
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
Heng Long Releasing 1/16 King Tiger
Since MATO is selling a metal track and sprocket set, it must mean there's a KT around the corner, otherwise, why the sprocket?
#4
RE: Heng Long Releasing 1/16 King Tiger
It is easier to make a bad copy of already existing Tamiya tank than produce something new.
Also, HL Sherman should be expected.
Also, HL Sherman should be expected.
ORIGINAL: tomzag
i am not suprised.
i am not suprised.
#7
RE: Heng Long Releasing 1/16 King Tiger
Swath, that raised area in the center of the bolt pattern looks strange. Unless it is designed like the Tamiya one, and just doesn't have the screw plug pushed in flush with the face.
Also, am I (not) seeing things or are there no track pins in the track around that sprocket?
Also, am I (not) seeing things or are there no track pins in the track around that sprocket?
#8
Senior Member
RE: Heng Long Releasing 1/16 King Tiger
I'm not familiar with the Tamiyas that's why I posted the picture. But it does look like the pins are recessed in the tracks.
#9
Join Date: May 2006
Location: near montreal,
QC, CANADA
Posts: 686
Received 0 Likes
on
0 Posts
RE: Heng Long Releasing 1/16 King Tiger
captncrunch>>> you avatar picture is ...
subliminaly telling me to buy konigstiger
dawn picture ,it always comes back ...
please dont post pics of it !
subliminaly telling me to buy konigstiger
dawn picture ,it always comes back ...
please dont post pics of it !
#12
RE: Heng Long Releasing 1/16 King Tiger
I'll bet he is, Ice! He still hasn't figured out how to get the turret to turn in any other mode but manual. []
In other words, it is still only a 1/4 option Tamiya.
In other words, it is still only a 1/4 option Tamiya.
#14
RE: Heng Long Releasing 1/16 King Tiger
Until we figure out what exactly is going on and for what tank those Mato accessories are for, I'd say there is no KT on the horizon. Anything is possible however.
CapnCrunch43: that is, by the way, the most intense and realistically posed tank commander I have seen (at least for a combat situation). The others (including mine) are too casual, almost falling out of the turrets or seemingly drunk in oblivion.
-Harq
CapnCrunch43: that is, by the way, the most intense and realistically posed tank commander I have seen (at least for a combat situation). The others (including mine) are too casual, almost falling out of the turrets or seemingly drunk in oblivion.
-Harq
ORIGINAL: Ben2006
I like the SprayPaint on it.... dose anyone know when this one is coming out...?
I like the SprayPaint on it.... dose anyone know when this one is coming out...?
#15
Join Date: May 2006
Location: near montreal,
QC, CANADA
Posts: 686
Received 0 Likes
on
0 Posts
RE: Heng Long Releasing 1/16 King Tiger
what a nice tank Cap !
we couldnt see the comander on the avatar , really cute hidding...
nice wethering.
dawn dishwasher ...,i want that tank
we couldnt see the comander on the avatar , really cute hidding...
nice wethering.
dawn dishwasher ...,i want that tank
#17
Join Date: May 2006
Location: near montreal,
QC, CANADA
Posts: 686
Received 0 Likes
on
0 Posts
RE: Heng Long Releasing 1/16 King Tiger
there is a kt picture up here, but no tamiya owners confirmed that it was a tam. ,capncrunch has raise a point on his 1 post here:
could a tam owner say that it is really a tam ?
look like a tam for me ,but do not have a kt.
could a tam owner say that it is really a tam ?
look like a tam for me ,but do not have a kt.
#20
Junior Member
Join Date: May 2007
Location: Coeur d\'Alene,
ID
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: Heng Long Releasing 1/16 King Tiger
Not sure of the exact release date. Sometime in the fall. Here's a picture though.
[link]http://www.tankzone.co.uk/cart/tz_henglong.htm[/link]
Looks nice.
[link]http://www.tankzone.co.uk/cart/tz_henglong.htm[/link]
Looks nice.
#21
My Feedback: (24)
RE: Heng Long Releasing 1/16 King Tiger
ORIGINAL: CapnCrunch43
Swath, that raised area in the center of the bolt pattern looks strange. Unless it is designed like the Tamiya one, and just doesn't have the screw plug pushed in flush with the face.
Swath, that raised area in the center of the bolt pattern looks strange. Unless it is designed like the Tamiya one, and just doesn't have the screw plug pushed in flush with the face.
Also, am I (not) seeing things or are there no track pins in the track around that sprocket?
#22
Junior Member
Join Date: May 2007
Location: southampton, UNITED KINGDOM
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: Heng Long Releasing 1/16 King Tiger
hi guys,just seen this post,matorro are releasing a 1/16 king tiger, there is a little ad' on tank zone's site,due out in the autumn,also i emailed mato to enquire about this, and they will be stocking it,may be before the autumn,no prices as yet as they have not been released from the factory
#24
Junior Member
Join Date: May 2007
Location: southampton, UNITED KINGDOM
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: Heng Long Releasing 1/16 King Tiger
i would imagine the price would be about the same as the matorro sturmtiger, 169.00 canadian dollars, thats the price mato charge. cant wait to get my paws on one. i like the tamiya kits, but the prices charged for them are obscene
#25
My Feedback: (2)
RE: Heng Long Releasing 1/16 King Tiger
[]To bad they will use the same electronics that the sturmtiger uses and it don't have enough tork or power to turn the tank well...........and a king tiger will be much heavier so it most likly willl worke even worse in this new version.... Wish they made a better battery and electrics so the tanks drove better....