Im asking this because im using some extra motors from a HL tank I have in my Impact gearboxes and on the Tamiya motors the wires are yellow and green witch one is plus and minus
so when I put in the DMD I can follow the color code in the instruction manual . Im using Dean connectors and dont want to have to resolder them if I got it wrong .

Thanks
Jimmy

Green is positive Jimmy.

Thanks Panther F

I looked at my Panther motors that is the next Tank after the KT still in the box to build and see a red dot mark above the green was hoping that was positive .

Thanks
Jimmy

Use the "RED" dot to reference the wiring

Remember as the Impact gearbox has an extra gear over the stock Tamiya units the motor connections will need to be reversed.