RCU Forums - Missing screw?

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Tanks (https://www.rcuniverse.com/forum/rc-tanks-369/)

- - Missing screw? (https://www.rcuniverse.com/forum/rc-tanks-369/11341635-missing-screw.html)

Der Vista Fux

12-23-2012 10:14 AM

Missing screw?

I just got a new strumgeshutt III, and the left side sprocket wheel came off. I looked all over and I couldn't find a screw that might of come out. I noticed. The inside wheel had bumps on it, and the outside had matching holes. I attached the wheel to the track, banged the wheel together with the inside one and it seems okay. If there is a screw, does anybody know the size, and where I can get it. It's a hen long upgraded strum.

thanks and merry Xmas.<br type="_moz" />

afv	12-23-2012 12:09 PM

RE: Missing screw?

Is it heng long, You can get them from a hardware store, if it's the one that holds the sprocket on it's size m3 about 12mm long, take the one out of the other side and that will give you the length
regards Jack.

FreakyDude

12-23-2012 01:16 PM

RE: Missing screw?

If you can't get one at your hardware store send me a pm. I certainly would have one or two laying around.

Quote:

ORIGINAL: Lamp02

I just got a new strumgeshutt III, and the left side sprocket wheel came off. I looked all over and I couldn't find a screw that might of come out. I noticed. The inside wheel had bumps on it, and the outside had matching holes. I attached the wheel to the track, banged the wheel together with the inside one and it seems okay. If there is a screw, does anybody know the size, and where I can get it. It's a hen long upgraded strum.

thanks and merry Xmas.<br type="_moz" />

jarndice

12-23-2012 08:57 PM

RE: Missing screw?

Just a thought but if this is a recent buy then it might be a hex head and not the old pattern cross head screw.. shaun

All times are GMT -8. The time now is 03:48 PM.