binding problem
 

Has anybody ever tried to bind this Tx and receiver? I have tried for about an hour and have not been able to do it. Im using a tamiya TBLE-02S Esc. Ive seent hese setups on varies r/c stuff but I cant seem to get it to bind. And Im guessing that the tx and rx needs to bind before setting up the esc.

Are you getting power to the RX with the Bind plug in? Fresh batteries?

its hard to tell if power is getting to the rx, theres no led light on it. and im using fresh batteries. the esc manual show the esc to plug in to the 2ch and bind plug goes in the bind/batt. slot. I hold the bind button in, turn on radio and the light and the radio flashs fast, and then I turn on the battery switch on the esc.the radio led is suppose to go slow when it binds, cant get it to do that.

I usually have power to the RX first and then turn the TX on with the bind button held in while turning the power on.

Ill try that and see, thanks

nope, still nothing

im assuming that this doesn't need its own battery hooked to it, should run with battery that goes thru the esc to the rx.

http://www.kyosho.com/jpn/support/in..._KT431S_IM.pdf
Page 22 for binding the receiver.

https://www.tamiyausa.com/pdf/manuals/45057ml.pdf
For the ESC

the first link, I already looked at, it shows a compete different rx with the KT4r31s tx and I have the the directions for the esc, the esc come setup for brushed motors, thats what im using. cant find anything on binding the kt431s tx with a kr-632 rx. the 632 has no led light on it. thats how i bought the radio, was with the newer kr-632 rx. thanks for the help tho, i appreciate it.

That pdf lists the KR-632 as an acceptable receiver for the KT-431S on page 9. So the method should be the same. Sorry I couldn't be more help.

thanks for your help, i thought it would be the same also, except for a led being on the rx. I tried that way about 5 times, still couldn't get it to work, will keep trying and see what happens, fingers crossed :)

I've found a reference to the 431 transmitter and the 632 receiver, just waiting for the slow 60meg PDF download...

great, thanks

Attachment 2216698
The receiver supposedly has an LED

i guess it does, never came on when I tried to bind, Ill try again, thanks very much.

Link to the 58+ meg file I found it in.
http://www.kyosho.com/jpn/support/in...ZARD_FR_IM.pdf

thanks, ill download it.

still cant get it to bind, heres how it is setup, battery to the esc, then from the esc goes the wire to channel 2, (esc directions say thats where to hook up the esc to.) I put the bind plug into the rx in the bind slot. I hold the bind button in on the tx and turn the power on, i release the bind button and the light flashing fast, (suppose to slow down after bind) I then turn the esc power switch on and it shows a blinking light on the esc(thats the way its suppose to be for a brushed motor.) and a led is suppose to blink on the rx but thats not happening, makes me thing that no power is getting from the esc to the rx.

I'm sorry in advance. You are flipping that switch to power up the esc and RX right? I do IT work you'd be suprised at the things that we find.

I found the problem< I had the wire that was going from the esc to the rx in backwards, had the white wire on the right, suppose to go on the left. in other words, from left to right, white,red black.

Good job!

lol, this was harder then building my gaming computer:confused:

Seriously???? that shiets easy.

once I found out the stupid thing I was doing, then it was ez, lol

I guess it is always like that. The last one I couldn't find the case hardware.

I finally found a case that I like, I used change out about every three months, But Ill keep this one for awhile.

Thats a cleeeeen setup. We run Intels in this house! LOL and its about 15 degrees warmer in this room with 3 running.

Yay! Glad it finally worked! Ya, proper wire connections does make a difference.

OK, Troy, guess who I'm calling on when I get ready to try my hand at programming this 9X!! :)

Ghost Busters???

Well, they probably do know more about radios than I do, but not them ... YOU!! :)

Just kidding, but I will be looking for help from someone so I don't end up pulling my hair out. Making radios sit up and do tricks is definitely not my strong suit. But, I have to figure out how to make one of the switches turn the laser pointer on and off.