IBU2 Ultimate
 

Gents: This one has me stumped. I have a number of the IBU2 Ultimate boards and am fairly familiar with how to program them, but I can not figure out how to turn off the function which makes the IR apple flash every time it is ready to fire again. I have my tank set for medium so it has a 5 second recycle timing and once that time is up, the apple flashes a couple times....telling me I can shoot again. This causes confusion to others who think they scored a hit at that same time. Besides, I have a pretty good feel for 5 seconds and don't need a flasher to tell me...."ok...you can shoot again" LOL. I do not see this subject addressed in the IBU manual, but I could have missed it. Hope someone has solved this problem by now. Thanks, PP

It’s the extended signaling on the INI file on the SD.
turn off extended signaling.

Thanks Rich: I also got a quick reply from Ian of RC Tank Electronics in the UK (who is the US dealer for the IBU Boards). He said: This flashing sequence is called Extended Signaling and if you go to the setting files for a board, and find the Miscellaneous Setup, you will see the following at the bottom: Flasher=1;0=Extends signaling OFF, 1=Extended signaling ON. Change to 0 and the flashing will stop. If your board setting's file is missing this info, you can copy and paste it into the bottom of that section. Ian has always been superb with customer support and we at FRAG highly recommend him as a supplier. PP

I totally agree with Paul, Ian Judge is just great. He really knows the product, he's very friendly, and he's always willing to help anytime you have a problem. I don't think we could ask for a better vendor for IBU.