WSN T34 CONVERSION QUESTIONS!!
 

I am considering a conversion on this model. How are the tracks and gearboxes?
Weak or OK with some care taken while driving?

I can handle the scratch building work but want to be sure the driveline would be up to the task. I plan on using a dual ESC setup and my own electronics for the most part. Will the metal HL boxes fit in with some effort? Aftermarket tracks available? Any info you have will be much appreciated. After building the 1117, Im hooked. Just dont want to drop the cash for Tamiya right now.

DH

RE: WSN T34 CONVERSION QUESTIONS!!
 

here is a link for tracks and conversion sets for the T34
http://www.tankzone.co.uk/cart/tz_t34.htm

hope this helps

cheers Ian

RE: WSN T34 CONVERSION QUESTIONS!!
 

Be sure to check out this site for more info. It is dedicated to RC to Bandai and WSN T34s

http://groups.yahoo.com/group/BigBandaiTanks/



Kevin O'C
<S.C.A.T>

RE: WSN T34 CONVERSION QUESTIONS!!
 

:D You will also want to have a look at this, if you haven't already:

http://www.rctc.co.nz/russian_t34_upgrade.htm

Jason

RE: WSN T34 CONVERSION QUESTIONS!!
 

Thanks guys, I have seen these but they lend no information on the track or gearbox durability. Anone else have some input? It HAS been an entire hour since I posted this.........LOL.

DH

RE: WSN T34 CONVERSION QUESTIONS!!
 

Contact Ethan at DAK - Desert Armor Korps - He is wrapping a T34/76 conversion. He not only is updating to a Tamiya Battle system, but took backdated the entire upper tank to a T34/76 by combining the WSN kit with a static kit. Read through and he does talk about the gearboxes. An e-mail should clear up any other question you have.

www.desertarmor.com General Page

http://web.mac.com/ethandunsford/iWe...20Project.html T34 Page

Kevin O'C
<S.C.A.T.>

RE: WSN T34 CONVERSION QUESTIONS!!
 

Sorry it too SO long......... :D

RE: WSN T34 CONVERSION QUESTIONS!!
 

Myself and another member in our tank group have done the conversion using the stock gears that came with the tank. With some reasonable driving around a battlefield that is inside (no rocks, dirt, etc.) and you should be fine. I have about 3 meetings on my T34 with about 5 or 6 battles per meeting and it still hasn't let me down. Use some 280 motors replacing the stock units and the tank is a blast!

Of course, don't expect the durability of a Tamiya gearbox.


Jeff

RE: WSN T34 CONVERSION QUESTIONS!!
 

The plastic tracks are great. They hold up very well and are plenty strong.;)

RE: WSN T34 CONVERSION QUESTIONS!!
 

There's some pics here of metal T34 replacement gears and tracks
http://babelfish.altavista.com/babel...26znewsid%3d41


but they don't seem to be listed on the Tamtoys site[:o]

RE: WSN T34 CONVERSION QUESTIONS!!
 

WOW! I'd like to try a set of those!


Jeff

RE: WSN T34 CONVERSION QUESTIONS!!
 

I have a T34 that is now converted to use Pershing Gearboxes BUT before that I used the 280 with standard gearboxes... the problem was striping the final drive gears... they did not last long at all (less then 5 min in one case) . ... I would not mind trying those metal gears in one to see how they hold up. could make converting the T34 to Full Option MUCH MUCH less expensive and less time consuming. Those tracks look awesome

Regards,
J

RE: WSN T34 CONVERSION QUESTIONS!!
 

Here's a 'how to' on the T34 metal gears
http://babelfish.altavista.com/babel...hreadid%3d1306

RE: WSN T34 CONVERSION QUESTIONS!!
 

Will the HL gearboxes fit in the T34 with minor mods or are they just too big?

Dh

RE: WSN T34 CONVERSION QUESTIONS!!
 

check this link , might interest you , you may have to use a translator ...
http://www.rc-panzerketten-forum.com...84498ce&page=1

RE: WSN T34 CONVERSION QUESTIONS!!
 

Anyone tried the metal HL gearbox in the 34? I have seen the Pershing box squeezed in there which I believe is the same as the Tam. tiger. If the HL is a direct copy of that, maybe the Hl gearbox will fit. Anyone follow that?


DH

RE: WSN T34 CONVERSION QUESTIONS!!
 

DH,

The latest is Ethan and his T-34/76 should be at out next battle day in August. A couple of the guys from DAK are making the trip out. Nothing like seeing something in person!

Nice job on the Dodge truck. Can't wait to see it!


Kevin O'C
<S.C.A.T.>