RCU Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Tanks (https://www.rcuniverse.com/forum/rc-tanks-369/)
-   -   Need your help, Spektrum Dx6i and Taimya DMD (https://www.rcuniverse.com/forum/rc-tanks-369/9253526-need-your-help-spektrum-dx6i-taimya-dmd.html)

ksoc 07-19-2010 08:12 PM
RE: Need your help, Spektrum Dx6i and Taimya DMD
 
I was just wondering if the spectrum or computor radios actually added some functions that cant be done on the Skysports.
I originally went with Spektrum for the 2.4 GHz. The computer function is helpful. I have started to use servos for my gun elevation (Tamiya) and the computer lets me easily set the amount of travel for the servo. Additionally I was able to program the main gun to fire off and existing switch vs open the radio and soldering in switches.

BiggTony 07-19-2010 09:10 PM
RE: Need your help, Spektrum Dx6i and Taimya DMD
 
Plus Greg, the DX6i allows the user to program setting for more than one type of vehicle, should you fly, hover, drive or tread. I got the DX6i because I had the DX5E for my xmods that I used to have. When I read that some people were having problems using the DX5e with tanks, I sold it for the Dx6i that was apparently supposed to be easy to use with tanks......unfortunately I based that off of one or two posts and as my luck would have it, there were people saying the same thing about the Dx6i. I'm not transmitter/receiver witty so I think I'm in for a ride on this one.

Flyn Chris 07-20-2010 07:03 AM
RE: Need your help, Spektrum Dx6i and Taimya DMD
 
Hang in there Tony, if I can figure it out so can you:D

dlobmwm3 04-01-2011 09:24 PM
RE: Need your help, Spektrum Dx6i and Taimya DMD
 

ORIGINAL: Flyn Chris

WOOHOO! I turned around the plugs so black is away from the rx and white inboard. I was able to bind and then I got engine start up!!!!
The plugs on the DMD and a fin on the white side so after removing them, I figured that portion would go to the outside. There are no polarity markings on the receiver so I had a 50/50 chance on getting it wrong and I did.

Okay before I go any further, I did reset the DMD.
I have Channel 4 (Turret) in rudder, channel 2 (throttle) in elev, channel 1 (rudder) in aleron and channel 3 (main gun) in throttle. I want right stick tank control. When doing the set-up on the DMD, do I follow the instructions exactly, left stick up and down, then left stick left and right, then on the the right stick, or do I do the right stick first because of my layout?

Thank you guys, you sure saved me a lot of headaches in helping me.
HI Flyn Chris. I finally got my Sherman to work based on your instructions!!! Thank you. Does anyone know how I can fix one minor issue? Issue is when I use the right controller to steer, the top right diagonal and bottom right<meta charset="utf-8" />diagonaldrives the tank completely straight vs turning in the respective directions.
<br type="_moz" />

2Shots 05-07-2013 10:54 PM
RE: Need your help, Spektrum Dx6i and Taimya DMD
 
Just don't reply if you have nothing worth to say.

Strato50 05-08-2013 12:10 AM
RE: Need your help, Spektrum Dx6i and Taimya DMD
 
http://images.ncix.com/forumimages/1...C209014034.jpg

http://buymarijuanaseeds.com/communi...on-jpg.360154/

http://www.zx-10r.net/forum/attachme...1&d=1216690804

... :P


All times are GMT -8. The time now is 04:13 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.