Hanger 9 Corsair missing book
#1
Thread Starter
Junior Member
Joined: Apr 2003
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
From: Tucson,
AZ,
I have a hanger 9 corsair 60 all built up, but the book seems to have dissapeared on me. The only thing i have left is set the CG and the control surfaces. Can someone please send me those specs? Or is there a place online to download the instruction book?
Thanks
Larry
Thanks
Larry
#3

My Feedback: (35)
Joined: May 2004
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
From: Moreno Valley,
CA
Larry,
there is a VERY extensive thread related to the Hangar 9 Corsair in which one of the topics concerns the CG. I would suggest you read the following thread thoroughly that addresses a lot of issues with this ARF.
http://www.rcuniverse.com/forum/m_11...corsair/tm.htm
randy
there is a VERY extensive thread related to the Hangar 9 Corsair in which one of the topics concerns the CG. I would suggest you read the following thread thoroughly that addresses a lot of issues with this ARF.
http://www.rcuniverse.com/forum/m_11...corsair/tm.htm
randy
#4
Senior Member
My Feedback: (17)
Joined: Jan 2003
Posts: 2,106
Likes: 0
Received 0 Likes
on
0 Posts
From: San Antonio,
TX
I'll help you. The recommended CG that Hanger 9 wrote in the manual is 5 inches, but some are going with 4.5".
Recommended Control Throws
Aileron Low Rate High Rate
1/2" up 9/16" up
1/2" down 11/16" down
Elevator Low Rate High Rate
9/16" up 7/8" up
9/16" down 13/16 down
Rudder Low Rate Hight Rate
1 1/2 left 2" left
1 1/2 right 2" right
Good luck, let up know how she flys.
Recommended Control Throws
Aileron Low Rate High Rate
1/2" up 9/16" up
1/2" down 11/16" down
Elevator Low Rate High Rate
9/16" up 7/8" up
9/16" down 13/16 down
Rudder Low Rate Hight Rate
1 1/2 left 2" left
1 1/2 right 2" right
Good luck, let up know how she flys.



