Panel lines & rivet details on a 2C Hurricane
02-11-2010, 11:09 PM
#1
Thread Starter
Join Date: Sep 2007
Location: sydney, AUSTRALIA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Panel lines & rivet details on a 2C Hurricane
Hi can someone help me and post here with panel lines and rivet detail on a 2C Hurricane every thing i have in my books is confusing especially rivets on the wing.
Thanks. Dave.
Thanks. Dave.
02-12-2010, 04:21 PM
#2
My Feedback: (15)
RE: Panel lines & rivet details on a 2C Hurricane
Jan 13, 2010 ... HyperScale is proudly supported by Squadron.com ... Pacific Coast Models 1/32 scale Hurricane Mk.I Early Review by Brett Green ...
http://www.hyperscale.com/2010/revie...reviewbg_1.htm - Cached-try this link
http://www.hyperscale.com/2010/revie...reviewbg_1.htm - Cached-try this link
02-13-2010, 01:58 AM
#3
Thread Starter
Join Date: Sep 2007
Location: sydney, AUSTRALIA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
RE: Panel lines & rivet details on a 2C Hurricane
Hi LDM, thanks very much it was a good site.
On this site http://www.wrcs.org.au/ and go to "Hurricane diaries" Put this in the search box and all the 9 build sections will come up a complete build sequence on the 2C Vailly Aviation Hurricane and there is a very detailed description of the rivets and panel lines in number 9.
There are 7200 rivets! i am not sure if i have the patience.
thanks again.
Dave.
On this site http://www.wrcs.org.au/ and go to "Hurricane diaries" Put this in the search box and all the 9 build sections will come up a complete build sequence on the 2C Vailly Aviation Hurricane and there is a very detailed description of the rivets and panel lines in number 9.
There are 7200 rivets! i am not sure if i have the patience.
thanks again.
Dave.
