BT Maltese Spitfire MKIX
1 Attachment(s)
i dusted off my BT spit kit last night. Got all my stuff for it Retracts, Motor, pilot and subject. I got the kit from Vic R/C so i would think this would go a bit faster then if i had to build up my fuse we will see. Below is a photo of the subject. This bird is at the Malta Aviation museum
|
RE: BT Maltese Spitfire MKIX
Hey a build thread. Nice! I will be following this one here and on your website.
|
RE: BT Maltese Spitfire MKIX
Sweet. Mk IX is my favorite version. I have the Pica 1/6 scale (which is really not very scale, but it flies well.) Give us some details like size, engine, retracts, etc.
|
RE: BT Maltese Spitfire MKIX
This spit will be powered by a DA 50, gear is from Sierra, and the control surfaces will have Hitec hs-5645mg servos. This is my first big spit i have build 2 topflite spits in the past.
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
well after a year of setbacks and side tracks on other airplanes i got her going again
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
got the wing together
|
RE: BT Maltese Spitfire MKIX
Todd, looking great! That's one of my favorite Spit schemes. I've got one in the line to be built, so I'll be watching with interest. Keep up the great work.
Sam |
RE: BT Maltese Spitfire MKIX
Awesome, another Spitfire build. I will be watching too.
A Mk IX at that.[sm=thumbs_up.gif] Cheers and good luck with it, Brad |
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
gear installed
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
one side sheeted.
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
Looking good Farmer, I'm building one also (wood kit) had to stop on it in mid summer, but hope to get back on it soon. It has a DL-50 mounted in it.
Kelly BTW are the retract in yours Sierra? |
RE: BT Maltese Spitfire MKIX
Yes the retracts and wheels are Sierra.
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
Got home and back to work.
|
RE: BT Maltese Spitfire MKIX
It's about time you got back to work on this thing. looking good
I'm hooking up linkages and final fitting on mine. Trying to get it ready for glass. Sorry no new pix Kelly |
RE: BT Maltese Spitfire MKIX
ya i was gone for most of the month of December. I hate it when work gets in the way of my hobby
|
RE: BT Maltese Spitfire MKIX
BTW are you going to use a extention on the crank like mine?
|
RE: BT Maltese Spitfire MKIX
i may be able get on with out it.
|
RE: BT Maltese Spitfire MKIX
Now you should be able to mark and cut things more accurately and in "style."
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
thats for sure!
|
RE: BT Maltese Spitfire MKIX
Great subject, this will be my next bird after my YA Spit. I'm interested on what needs to be done to the fuse to strengthen it (formers). Stay focused on the 25m target.
Moggy |
RE: BT Maltese Spitfire MKIX
as you can see i have the firewall and the former that goes in front of the wing done. i figure i will need one at the back of the wing and one for the tail wheel. The fuse is nice and stiff Vic does a great job with the glass
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
My new toybox on wheels
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
Well the locks were full of ice on my trailer so I did some work on the spit. Got the wing sanded and the ailerons sealed up so it’s time to get on to fuse. And Pete made my pilot an instruction manual. The funny thing its real all the pages have photos and stuff on them. What do expect he’s German!
|
RE: BT Maltese Spitfire MKIX
1 Attachment(s)
got the formers in for the wing plate and the firewall is in.
|
RE: BT Maltese Spitfire MKIX
Hey Terry, I visited your website. Very nice.
Do you have a pic of the spitfire cockpit kit. I maybe getting in touch with you about some parts. Your spitfire look great. Later, Kelly |
All times are GMT -8. The time now is 02:21 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.