RCV 120CD
#1
![](/forum/images/badges/trading_plus_member.png)
Thread Starter
My Feedback: (10)
Join Date: Sep 2004
Location: Displaced Canadian in Central Texas TX
Posts: 2,601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
I am interested in getting a warbird that calls for 120 4 Stroke; I would love to put a RCV CD Engine in it; any idea if RCV is developing a 120 CD; not interested in the 120SP. Thanks.
#2
Senior Member
Join Date: Apr 2002
Location: WimborneDorset, UNITED KINGDOM
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Sorry for the delay in responding, but I was attending a show last week.
In answer to your query, RCV are currently developing a 130CD which should be available early next year (in time for next springs flying season)
I hope this helps. Best regards
Laurenne
In answer to your query, RCV are currently developing a 130CD which should be available early next year (in time for next springs flying season)
I hope this helps. Best regards
Laurenne
#3
![](/forum/images/badges/premium_member.png)
Join Date: Nov 2002
Location: stoughton, MA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
That is good news.
I currently have a RCV 91 CD and I like it very much. It spins an APC 14x6 @ 9000 RPM and the noise level is well below my flying field limits. Will shortly be starting a 20% scale Zlin Z-526AS by Dick van Mourik with a narrow cowl that I bet the 130CD would fit nicely.
Any chance of getting some early outline drawings that I could use for sizing and motor mount planning?
Ray
I currently have a RCV 91 CD and I like it very much. It spins an APC 14x6 @ 9000 RPM and the noise level is well below my flying field limits. Will shortly be starting a 20% scale Zlin Z-526AS by Dick van Mourik with a narrow cowl that I bet the 130CD would fit nicely.
Any chance of getting some early outline drawings that I could use for sizing and motor mount planning?
Ray