Caldera 10e stop making turns help
05-01-2013 | 01:19 PM
#1
Thread Starter
Junior Member
Caldera 10e stop making turns help
Hello, I'm new to rc. I have a caldera 10e and my servo stop working. It usually Twitch when the power is turn on, but now it don't anymore . I try plugging another servo but still nothing. The car still goes but no Turning. The last thing I was messing with was the normal and reverse switch on the transmitter then all of a sudden the rc car stop responding.
05-01-2013 | 01:52 PM
#2
RE: Caldera 10e stop making turns help
ORIGINAL: Eg-r
Hello, I'm new to rc. I have a caldera 10e and my servo stop working. It usually Twitch when the power is turn on, but now it don't anymore . I try plugging another servo but still nothing. The car still goes but no Turning. The last thing I was messing with was the normal and reverse switch on the transmitter then all of a sudden the rc car stop responding.
Hello, I'm new to rc. I have a caldera 10e and my servo stop working. It usually Twitch when the power is turn on, but now it don't anymore . I try plugging another servo but still nothing. The car still goes but no Turning. The last thing I was messing with was the normal and reverse switch on the transmitter then all of a sudden the rc car stop responding.
if that checks out, then it could be the radio or reciever.
05-02-2013 | 07:10 AM
#4
RE: Caldera 10e stop making turns help
ORIGINAL: Eg-r
Yes, I made sure that was all the way up.
Yes, I made sure that was all the way up.
if its not that old, redcat will replace.
If it is older, the recievers are less than $20
