Blackout sc pro
04-30-2020 | 02:47 PM
#1
Thread Starter
Junior Member
Joined: Apr 2020
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Ohio
Blackout sc pro
I have a blackout sc pro and I want to know if it will take a 3s 11.1 volt 5000mah battery without having to change anything,it is stock now and came with a 7.4 volt 3200mah battery. Thanks for any help with this question!
05-13-2020 | 06:59 AM
#2
Nobody else has answered so I will jump in with my 2 cents.
I have not tried this myself with the Blackout hardware but others online have.
If there is a 6v cooling fan on the ESC and you power it with the 3s power it will live a short life.
Either take power for the fan from the receiver or upgrade to a 12v fan.
3s will put more stress on the pieces that are already marginal.
Pinions and spurs - plan on having spares of these.
Edit: btw, where in Ohio?
I have not tried this myself with the Blackout hardware but others online have.
If there is a 6v cooling fan on the ESC and you power it with the 3s power it will live a short life.
Either take power for the fan from the receiver or upgrade to a 12v fan.
3s will put more stress on the pieces that are already marginal.
Pinions and spurs - plan on having spares of these.
Edit: btw, where in Ohio?
05-13-2020 | 07:47 AM
#3
Thread Starter
Junior Member
Joined: Apr 2020
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: Ohio
Nobody else has answered so I will jump in with my 2 cents.
I have not tried this myself with the Blackout hardware but others online have.
If there is a 6v cooling fan on the ESC and you power it with the 3s power it will live a short life.
Either take power for the fan from the receiver or upgrade to a 12v fan.
3s will put more stress on the pieces that are already marginal.
Pinions and spurs - plan on having spares of these.
Edit: btw, where in Ohio?
I have not tried this myself with the Blackout hardware but others online have.
If there is a 6v cooling fan on the ESC and you power it with the 3s power it will live a short life.
Either take power for the fan from the receiver or upgrade to a 12v fan.
3s will put more stress on the pieces that are already marginal.
Pinions and spurs - plan on having spares of these.
Edit: btw, where in Ohio?
