Volcano Problems and finally back...
01-30-2009, 03:10 PM
#1
Senior Member
Thread Starter
Join Date: Dec 2007
Location: Starkville,
MS
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Volcano Problems and finally back...
Volcano was running great... and then nothing it will sit there and run all day long but does not move, im am think something is wrong with the clutch bell or diff..s what do yall think
i used to be really big on this site but with work and other stuff going on haven't had the time to get back into the rc world.. we have about 3 to 4 foot of snow on the ground now and ready to try my volcano out on some sick jumps... and anyone around the Pittsburg area.. thats Pennslyvania area
i used to be really big on this site but with work and other stuff going on haven't had the time to get back into the rc world.. we have about 3 to 4 foot of snow on the ground now and ready to try my volcano out on some sick jumps... and anyone around the Pittsburg area.. thats Pennslyvania area
02-02-2009, 06:23 PM
#4
Senior Member
Join Date: Dec 2006
Location: Euless,
TX
Posts: 3,096
Likes: 0
Received 0 Likes
on
0 Posts
RE: Volcano Problems and finally back...
Check the drive cups coming off the transmission to see if the shafts are turning also check to make sure the slipper clitch isn't melted in the gear. I had a guy come into the shop once with that problem the slipper was too loose and it melted the center of the spur gear.
