RE: Redcat Racing Tornado Thread
LOL Swamp I'll leave that for you..and what I said was all true and you know it or atleast I think you would be smart enough to figure that out...kb73 your going to have to get universal dogbones they don't fall out not sure about the bending. you would have to spend like $300 extra to get the $200 you payed for the car
|
RE: Redcat Racing Tornado Thread
dominicevans your an idiot that is bashing redcat you have no idea *** your talking about and thats where I end this or I'll be banned. Yes I'm bashing him but he is bashing redcat and I take offence to it.Grow a brain......
|
RE: Redcat Racing Tornado Thread
I would have to agree that redcat is not the greatest out there but it depends on what u do to it and how u treat it. I went through tons of gears but never really broke much else till I hit a curb at full speed or jumped a real car. But in all honesty what do you expect for the price? If you want something to match your buddies $400 car you need to get a $400 car. You want a redcat that's better then the 1/10 buggy you'll need a few more bucks and go with the hurricane. Thicker dogbones, metal gears and built to bash. I consider the 1/10 scale more of an entry level vehicle. The old saying " You get what you pay for " is very true......Just my opinion.....
|
RE: Redcat Racing Tornado Thread
^agreed!
im not complainin tho. i like tinkering with my car. i get half the joy from working on the car and making it better and seeing how it runs afterwards. If nothing ever broke on my car or if it ran perfectly every single time i would probably get bored of it and sell it or it would sit in my garage for months. I dunno bout u guys but its like xmas everytime i get a order of new parts :D oh and bnick....too bad man. i was planning on ordering them next time. o well. i got the dirt hawg tires tho.....they feel kinda cheap to me. haven't put em on yet tho to see how they perform. |
RE: Redcat Racing Tornado Thread
swamp guy your one funny camper....lol i dont know what I talking about lol is this all hurting you so badly because your like a dealer or something?
|
RE: Redcat Racing Tornado Thread
I don't think anyone was really bashing redcat. just pointing out flaws. I've been through about 20 cars from all different brands and each one has had a design flaw. But when you think about the size and what you are doing with them they all do great in my opinion. When was the last time you jumped a real car 20ft or held it full throttle until you wrecked? Could you imagine your mechanic bill if you drove your real cars the way you drive your nitro's? That was the exact reason i got into rc's. You can do whatever you want, including improvements, wreck it at top speed and it might cost you $50 to fix. First time I took my Honda Del Sol out with nitrous hooked up i put a hole in one of my pistons the size of a quarter. So 5min. of fun cost me $1500. These things, you blow an engine your out max $200. That doesn't mean I'm going to bash Honda. It just means you learn a lesson. If you don't want to ruin stuff you can't push the limits. If you do you'll be ordering parts every time you drive. Works that way no matter what it is.
|
RE: Redcat Racing Tornado Thread
Have any of you guys seen this video of a rocket powered Tornado BB? If you haven't, here it is!!
[link]http://www.youtube.com/watch?v=h_7ckJ6ffYM[/link] |
RE: Redcat Racing Tornado Thread
ORIGINAL: Hibityhupla! I don't think anyone was really bashing redcat. just pointing out flaws. I've been through about 20 cars from all different brands and each one has had a design flaw. But when you think about the size and what you are doing with them they all do great in my opinion. When was the last time you jumped a real car 20ft or held it full throttle until you wrecked? Could you imagine your mechanic bill if you drove your real cars the way you drive your nitro's? That was the exact reason i got into rc's. You can do whatever you want, including improvements, wreck it at top speed and it might cost you $50 to fix. First time I took my Honda Del Sol out with nitrous hooked up i put a hole in one of my pistons the size of a quarter. So 5min. of fun cost me $1500. These things, you blow an engine your out max $200. That doesn't mean I'm going to bash Honda. It just means you learn a lesson. If you don't want to ruin stuff you can't push the limits. If you do you'll be ordering parts every time you drive. Works that way no matter what it is. oh and yea I saw that bb but the description in the video is wrong it should be nitro assisted rocket tornado bb[sm=teeth_smile.gif] lol |
RE: Redcat Racing Tornado Thread
I read on the forum about the roto start electric starter. I saw a link that said this one would fit. Here is the link to the one I got. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMVE0. Just so you know this does not fit the tornado not without heavy mods. The back plate is to big I had to drill holes in it to get it to work and the one way bearing was to small had to shim that but it works now 3 hours of hassel later. I did see on the redcat site they make a back plate for electric starters part number 11011H12. Here is the link to that page scroll down you will see it. http://shopping.netsuite.com/s.nl/c....ge=151,174,174 As soon as it is in stock I will get that. But wow does that electric start turn the car over so fast works way better than the pull start would recomend anyone to get this.
On a side not one of my screws to the engine mounts broke am I ok to run it on 3 screws untill I get my new mounts. I have lock tite on the three remaining screws. |
RE: Redcat Racing Tornado Thread
as for your roto plate it would be much simpler to just go to your lhs and get an hpi, they fit like a glove. The three screws should not effect you to bad for I'm sure all of us have had the same problem, just make sure to check it from time to time. hope this helped
|
RE: Redcat Racing Tornado Thread
1 Attachment(s)
I use a Sullivan tigerdrive. It is pointed up so it clears all the suspension very easy. It is a direct fit on the team infinity .18 engine. [link]http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGFK1[/link] You will also need the drive wand for it.[link]http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGFK4[/link]
Here is a link to all the conversion/cross reference page for engines.[link]http://www.sullivanproducts.com/TigerDriveXrefmainframe.htm[/link] Just remember to spin the engine counter clockwise and faster is not better. |
RE: Redcat Racing Tornado Thread
ORIGINAL: tklemin I use a Sullivan tigerdrive. It is pointed up so it clears all the suspension very easy. It is a direct fit on the team infinity .18 engine. [link]http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGFK1[/link] You will also need the drive wand for it.[link]http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGFK4[/link] Here is a link to all the conversion/cross reference page for engines.[link]http://www.sullivanproducts.com/TigerDriveXrefmainframe.htm[/link] Just remember to spin the engine counter clockwise and faster is not better. |
RE: Redcat Racing Tornado Thread
I never had an issue with the pull start till it just fell off. I also found that since I got rid of the pull start the throttle responds 100% better as the pull start is not blocking the servo arm. I would recomend to anyone to get rid of the pull start just for the throttle response alone.
|
RE: Redcat Racing Tornado Thread
What is the difference between the wand for the tiger drive and the roto start will the new wand fit on the roto start or do I need a whole new system
|
RE: Redcat Racing Tornado Thread
1 Attachment(s)
Tgerdrive is 7/32 allen. A rotostart wand will fit in the tigerdrive holder. Its hard to see, but the tigerdrive wand has set screws ont the right side and at each end to hold the wand and the drive end. You have to cut an allen key down to fit in drive end.Rotostart has a "TEE" shaped end. Just for your info a Losi spin start comes with a 6mm allen I think. If you use a rotostart or losi spinstart, You may have to either switch wires around on motor, or wire a battery backwards to spin in the correct direction. I use a Losi spinstart and switched the leads on a battery to spin the rotostart in one direction and another battery to use on my tigerdrive for my Tornado. Just make sure you write on it or mark it correctly for charging purposes and don't drop it in your electric vehicles. You can put whatever ends you want on either end of the tigerdrive adapter. Remember motors spin counter clockwise looking from the rear.
|
RE: Redcat Racing Tornado Thread
Sorry if this sounds stupid but will the tiger drive wand fit into the rotostart motor unit.
|
RE: Redcat Racing Tornado Thread
k i have a tornado bb, it has a vx 18 engine on it and i need to know where i can buy a new glow plug for it. so can anybody let me know where i can buy one?
|
RE: Redcat Racing Tornado Thread
pretty much any lhs or allaboutfun,vancouverhobbies, clermontmotorsports(I think thats what it's called) towerhobbies theres tons of places but I trust these ones. But try locally to find a lhs.
|
RE: Redcat Racing Tornado Thread
k thanks but are they all the same size or do i have to look for a specific size or wat?
|
RE: Redcat Racing Tornado Thread
mcoy 59 will work(mc59)
|
RE: Redcat Racing Tornado Thread
k i found some on vancouver hobbies but now im confused. what do they mean by hot, medium, and cold glow plugs??
|
RE: Redcat Racing Tornado Thread
Hot glow plugs burn hotter = engine runs hotter
Medium glow plugs burn cooler = cooler engine temps, could lean out alittle more. Most of the redcats run good on medium plugs. Col glow plug burns even cooler = cool engine temps, work good with higher nitro fuel, like 30% or 33% You want Medium plug for your small block redcats May want hot plug for your big block engines, more fuel flowing into engine needs higher temp glow plug to burn properly. |
RE: Redcat Racing Tornado Thread
ORIGINAL: AllAboutFunHobbies Hot glow plugs burn hotter = engine runs hotter Medium glow plugs burn cooler = cooler engine temps, could lean out alittle more. Most of the redcats run good on medium plugs. Col glow plug burns even cooler = cool engine temps, work good with higher nitro fuel, like 30% or 33% You want Medium plug for your small block redcats May want hot plug for your big block engines, more fuel flowing into engine needs higher temp glow plug to burn properly. Is a .18 a small block? |
RE: Redcat Racing Tornado Thread
yes
|
RE: Redcat Racing Tornado Thread
would this glow plug fit on my vx.18 engine on my tonando bb??
http://www3.towerhobbies.com/cgi-bin...?&I=LXTAG5&P=7 |
All times are GMT -8. The time now is 01:01 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.