RE: Redcat Racing Tsunami Thread
 

im going to pick one up tomorrow. Does anyone know what would cause my rear wheels to be toed in? Nothing is broken

RE: Redcat Racing Tsunami Thread
 

just gave a quick once over, its a 5x8 bearing here's a couple of links:

http://www.clermontmotorsports.com/s...5x8x2.5/Detail

or

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXM766

you will need 3 bearings if you dont use the second link or 2 bearings and the needle bearing in the second link. i would suggest getting 3 bearings,

you will need a 3/16 tension pin cut down to extend the shaft and a larger washer to keep the bell on, neither is a big deal.

RE: Redcat Racing Tsunami Thread
 

hey ehroof have you ever had your rear wheels toe in on you?

RE: Redcat Racing Tsunami Thread
 

do you mean set them up to toe in or have it happen out of no where? your supposed to have a little toe out in the front and a little toe in on the rear.

RE: Redcat Racing Tsunami Thread
 

really ok i just noticed thar mine were toed in a bit and couldnt figure our how that happened because there is no adjustment for that in the back. did you read my post about my engine and tranny problems?

RE: Redcat Racing Tsunami Thread
 

no bro, just looked over stuff fast, long weekend, going to bed in a few. email me or pm me with the question or a link to the thread.

RE: Redcat Racing Tsunami Thread
 

hey ehroof do you think these tires would work on my tsunami?

http://www.amainhobbies.com/product_...oducts_id/5259

RE: Redcat Racing Tsunami Thread
 

Toe in on the rear is good but not too much. It helps keep a better straight line.

RE: Redcat Racing Tsunami Thread
 

I have a fair bit of toe in on the back but there is no way to fix it is there?

RE: Redcat Racing Tsunami Thread
 

not on the rims, you will need 2.2 rims. and btw, the rims with the gladiator tires are a little over 4in.

RE: Redcat Racing Tsunami Thread
 

ok thanks man. Im just waiting for the hobby store to get some rims in for me. Are they hard to glue?

RE: Redcat Racing Tsunami Thread
 

nah, just take your time and use a medium ca glue. mount the tire to the rim then pull the tire away and put a dab of glue. Keep doing it a little at a time, you'll be ok.

RE: Redcat Racing Tsunami Thread
 

ok. I just bought a failsafe today. I ordered some parts from red cat and they sent me all of the same part now I have 4 sets of the 2015 lol oh well im sure they will get used up some day. Those tires I showed you do you think they would be a good loose dirt tire?

RE: Redcat Racing Tsunami Thread
 

go with the gladiators, good for loose dirt, just a great all around tire.

RE: Redcat Racing Tsunami Thread
 

ok man ill do that i just have to order them. thanks again for all the help

RE: Redcat Racing Tsunami Thread
 

:D n e time, your welcome

RE: Redcat Racing Tsunami Thread
 

Yokohama geolanders. Thats all the tire you will ever need. Great all around tire, sticks like glue and wears like steel. I have thes on my Jato and have tried a dozen other tires and none have come close. The Geolanders are awsome. But they are only for 2.2 wheels.

RE: Redcat Racing Tsunami Thread
 

I think there too tall for my tsunami. Can you tell me how tall they are?

RE: Redcat Racing Tsunami Thread
 

Question - will tmaxx shocks fit on the tsunami??

RE: Redcat Racing Tsunami Thread
 

LOL, on a side note, Yokohama Geolanders are good truck tires on a real truck too, lol :D

RE: Redcat Racing Tsunami Thread
 

They are the same size as the stock ones. About 4" tall but with 2.2 wheels.

RE: Redcat Racing Tsunami Thread
 

Yes the tmaxx shocks fit.

RE: Redcat Racing Tsunami Thread
 

does it hurt to drive a nitro rc in cold weather and snow?

RE: Redcat Racing Tsunami Thread
 

Only in you sit in the snow with no pants on:D


If it cold like that you do need to wrap the engine with foil to keep it warm or it will die easly[:-]

RE: Redcat Racing Tsunami Thread
 

so just wrap the head?