RE: volcano sv pro help
 

they are proline mashers mounted on rpm claws

RE: volcano sv pro help
 

thats okay was just checking (it was worth a shot to get rid of the single needle) :D

thanks again everyone for all the help .

RE: volcano sv pro help
 

hey guys i jinxed myself, last night i emailed (all about fun) to find out the replacement spur gear for the direct drive trans upgrade. He gave me the redcat part number 05112 and guess what i stripped out the spur gear today. Anyone know what brand i can use as a replacement so i can go to lhs and get one today :D. its like 67 degrees here today and i really want to run more today. also the stock one is 42 tooth can i jump up in theeth and get more torque for off the line , because the infinity 18 only has the one needle screw need more off the line .


thanks again,


Scott aka Secgenffemt

RE: volcano sv pro help
 

sorry bro, only the original spur will work with it.

RE: volcano sv pro help
 

is there a higher tooth gear avalable from redcat, right now i have the 42 tooth

RE: volcano sv pro help
 

05112 is a 44 tooth, 02112 is a 42 tooth.

ask clermontmotorsports.com he knows about the gears and has them in stock:

http://www.redcatracing.com/itemdeta...p?partno=02112
http://www.redcatracing.com/itemdeta...p?partno=05112

RE: volcano sv pro help
 

ok i'll drop him an email and see what he suggests thanks again for all the help eddie


scott

RE: volcano sv pro help
 

you got it bro, remember less teeth on the spur gives you more top end, its the opposite of the clutch bell

RE: volcano sv pro help
 

hey guys just an update ordered the parts i needed for the stock trans and the direct drive. Put the stock trans in with the 13 tooth cb and omg this thing is nuts now, not doing wheelies yet but will spin all four tires on take off now, havent started to retune it now that it has the stock trans back in but so far i love it. was only able to get the 44 tooth for the direct drive, we will see how that works if anything happens to the stock one now:D


thanks for all the help everyone

scott

RE: volcano sv pro help
 

hey does anyone know if the electric starter from redcat will fit the infinity 18 cause im tired of havin to fix the pullstart on mine (replaced the spring,cord,and rewound it about five times now).

RE: volcano sv pro help
 

i am pretty sure they use the same backplate, i would suggest asking the support on redcat's website before you order it though, i remember a problem with someone using a pullstart from hpi, they work on the vx .18 and not the infinity.






***** i just checked the site and they sell a different backplate for the vx.18 and the infinity .18 so i think they are different, not to mention they are out of stock on the infinty backplate*************

RE: volcano sv pro help
 

yeah that was me the first time it broke on me . now i think the plastic is wore right where the spring fit in the back cover so it keeps slipping out. thoght if i switched to the ele. start then i wouldnt have to worry then.



*********figures *******lol

( just checked it too and it seems like they sell the starter gun with the backplate for infinity .18 and .27 together for $40) is that how you see it too

RE: volcano sv pro help
 

Redcat used to have the adaptor for the Infinity[&:]

RE: volcano sv pro help
 

hey guys just wanted to give ya an update got a hold of redcat and they said that yes part# 70111j does come with the backplate for the infinity and will fit for me so i ordered it . cant wait to get it and get back (on the road) i have all this snow and it needs some tracks in it :D:D. i will let ya know how the rotostart works.



p.s. i will have to take some pics once i get it in and all back together

RE: volcano sv pro help
 

You can put the VX carb onto the infinity, its a little tricky[:@] infinity is held in with screws so if you install the VX carb onto the infinity you must drill and tap both sides of the carb. You can't put the Infinity carb on the VX [:'(] because there is no bottom O-ring to seal the carb[&o]

RE: volcano sv pro help
 

cool that doesnt sound to hard and thanks for the input i will have to keep that in mind when i get a little money againas always thanks again for all of your guys' help in here it has been a life saver:)

RE: volcano sv pro help
 

hey guys i just tore out another gear in the factory trans again not the main spur gear but one of the reduction gears so it back to the direct drive . hey clermont was just wondering if you could get back to me about those higher teeth gears on your site if they would fit in the direct drive or not? thanks again