harriers with spa3D
#1
Member
Thread Starter
Join Date: Jun 2006
Location: CAPE TOWNWESTERN PROVINCE, SOUTH AFRICA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
harriers with spa3D
When doing harriers do i need to program in any mixing.I heard that some guys mix in some opposite ail,but some says its not necessary.Is it necessary with the SPA3D.
#3
Member
Thread Starter
Join Date: Jun 2006
Location: CAPE TOWNWESTERN PROVINCE, SOUTH AFRICA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
RE: harriers with spa3D
With hard rudder inputs the plane seems to want to roll,so i thought that it should be countered with some aileron mixing but I think its better to learn with corrections anyway...thanks
#4
Member
Join Date: Dec 2005
Location: london, SINGAPORE
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
RE: harriers with spa3D
definately agree dont couple any mixing, learn to make corrections with the ailerons when putting in large rudder movements, as some wind conditions may exagerate roll hence requiring more aileron or less aileron