Building Scale hawk sport..help!
#1
Member
Thread Starter
My Feedback: (1)
Join Date: Nov 2003
Location: Greeleyville, SC
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Building Scale hawk sport..help!
Hey, i just bought a century hawk sport 30 with an installed gy401 gyro
and separate funkey hughes 500e fuselage... my question is, how do i get this heli to fly as stable as the scale helicopters on the simulators? Thanks for your help as I am fairly new to nitro heli's.
and separate funkey hughes 500e fuselage... my question is, how do i get this heli to fly as stable as the scale helicopters on the simulators? Thanks for your help as I am fairly new to nitro heli's.
#2
Senior Member
Join Date: Mar 2002
Location: Centural,
BC, CANADA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
RE: Building Scale hawk sport..help!
Set it up for scale flying instead of 3D.
Set for a lower head speed - 1400 to 1600 (the lower the head speed the softer the response)
Set for a more compressed collective pitch e.g. -2 to +9
Use the weights on the flybar and set them to be out against the flybar paddles.
Set for a lower head speed - 1400 to 1600 (the lower the head speed the softer the response)
Set for a more compressed collective pitch e.g. -2 to +9
Use the weights on the flybar and set them to be out against the flybar paddles.
#4
Member
Thread Starter
My Feedback: (1)
Join Date: Nov 2003
Location: Greeleyville, SC
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
RE: Building Scale hawk sport..help!
Ok, in beginners terms, how do i Set for a more compressed collective pitch?
Also what size flybar weights should i get for maximum stabalization for my .30 heli?
Also what size flybar weights should i get for maximum stabalization for my .30 heli?