How do I go about designing a simple EDF beginner model?
04-11-2002, 08:08 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location: Good \'Ole England
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
How do I go about designing a simple EDF beginner model?
Hi all!
I've been flying for about 2 years so you can see that I'm not going to be a precision flier!
I recently obtained a pair of EDF's which have 17 turn motors. They are both about 90mm in diameter.
I wish to build a simple jet style plane using one of my two EDF's.
Can anyone help?
If you know any sites or can give me some pointers on construction I'd be very grateful!
Cheers!
I've been flying for about 2 years so you can see that I'm not going to be a precision flier!
I recently obtained a pair of EDF's which have 17 turn motors. They are both about 90mm in diameter.
I wish to build a simple jet style plane using one of my two EDF's.
Can anyone help?
If you know any sites or can give me some pointers on construction I'd be very grateful!
Cheers!
04-13-2002, 03:09 AM
#2
Senior Member
Join Date: Jan 2002
Location: minneapolis,
MN
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
How do I go about designing a simple EDF beginner model?
