JOZSEF

HI,
I look for a better 3-view plan of Technoavia (Interavia) SP-91 / I-3 / E-3 that I have for CAD drawing and making an RC model.
.

JOZSEF

I am looking for TECHNICAL DESCRIPTIONS OF SP-91.
Here is an amazing aerobatic flight of Larry Schlesinger's SP-91 and the music is excellent as well.
.

JOZSEF

I have found two useable drawings.
http://xn--80aafy5bs.xn--p1ai/aviamu...let-i-3-sp-91/
I-3 (E-3, SP-91) aerobatic/trainer by Interavia
.

.

JOZSEF

In 2012, I bought a used SU-31 model and I had a lot of flights with it.
Wingspan: 2395mm
Motor: 3W 80ccm Twin-cylinder
Propeller: Bambula 26x10
Weight: 14,5Kg

Unfortunately, this model was a little bit heavy.
I plan to build an SP-91 single cab version model, scale M1: 3.
I hope this model will weigh less than the previous one.

JOZSEF

Unfortunately, I didn't get any drawings of SP-91.
I started to draw the CAD drawing of the model.
Wingspan of the model: 2700mm.
.

JOZSEF

I plan to use the NACA 0015 and NACA 0012 profiles in the wing.
Or do you have any suggestions for wing profiles?
.

JOZSEF

I have finished the elevators and the rudder CAD drawings.
.

highfly3D

so its your final decsion that you will build this airplane...

JOZSEF

Yes, of course.
.

JOZSEF

Scale: M 1:3 (mm)
.

JOZSEF

Scale M 1:3 (mm)
.

JOZSEF

I have finished drawing the wing.
.

highfly3D

JOZSEF

I HAVE GOT THESE PHOTOS FROM THE FAMOUS HUNGARIAN AEROBATIC PILOT ZOLTÁN VERES

Veres Zoltán Airshows | Born to fly
.

.

.

.

JOZSEF

SOLID EDGE STUDENT EDITION 2020 - Perspective view

You can download the higher resolution picture from my GOOGLE DRIVE.
https://drive.google.com/drive/folde...yj?usp=sharing.
.

.

JOZSEF

SOLID EDGE STUDENT EDITION 2020 - Perspective view

You can download the higher resolution picture from my GOOGLE DRIVE.
https://drive.google.com/drive/folde...yj?usp=sharing.

Could anybody help me to make the canopy for this model?
.

.

JOZSEF

I am not an experienced CAD drawer, but I like drawing in the SOLID EDGE.
Interavia_SP-91_M1-3-Motorburkolat-2-rcuniverse.par
https://drive.google.com/drive/folde...yj?usp=sharing.
.

JOZSEF

I have just finished drawing the first part of the 3D of the SP-91scale M1:3.
.

.
https://drive.google.com/drive/folde...yj?usp=sharing.
.

JOZSEF

I redrew the aft part of the canopy roof because the previous drawing was not successful.
SP-91 M 1-3-KABIN-3-RCU.par
https://drive.google.com/drive/folde...yj?usp=sharing.

.

JOZSEF

These pictures were taken by me in 2005 when I decided to build this model one day in the future.
Do you have any suggestions for the construction of this model (picture or drawing)?
.

.

.

.

.

JOZSEF

Do you have an idea for installing the main wheel? (picture or drawing)
Has anyone started building this model and cabin roof template scale M1:3?
.

JOZSEF

Yellow,Turquoise - Plywood 3,6,9 mm
Orange - Balsa 3 mm
.

.

.

JOZSEF

You can download the higher resolution pictures from my GOOGLE DRIVE.
https://drive.google.com/drive/folde...yj?usp=sharing.

JOZSEF

My modeling friend Attila Tóth, who is an experienced SOLID EDGE CAD designer, helps me a lot.
A few years ago he had made this EXTRA-230 CAD model drawing in SOLID EDGE V20 than built it.
This CAD drawing also inspired me to create my own CAD drawings.
.

.


​​​​​​​