Ugly Stick Plans.
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Cape Town, SOUTH AFRICA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Ugly Stick Plans.
Hi there, just wanted to know if there was any place on the net where there were plans to look at or to print for an ugly stick, I need to rebuild the wings for a fuselage that is about 46 in. Any help on this is greatly appreciated, good building
Ledz
Ledz
#2
Junior Member
My Feedback: (5)
Join Date: Mar 2002
Location: Yuma,
AZ
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
ugly stick plans
You can find a set of ugly stick plans on this site.
http://rf-hp.npi.msu.su/~vasya/RC/pl...port/sport.htm
http://rf-hp.npi.msu.su/~vasya/RC/pl...port/sport.htm
#3
My Feedback: (2)
Ugly Stick Plans.
That plan is pretty decent. I scaled them down to a 30" ws and put a norvel .074 on it. It was a great little barn burner. Had a roll rate of 2.5 per second. That might have been what killed it. Just too much fun. Will have to fix it. Think I'll make a 70" ws version.
Edwin
Edwin
#4
Senior Member
My Feedback: (5)
Join Date: Jan 2002
Location: Greenville,
SC
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Ugly Stick Plans.
RCM plan #939 is the original Ugly Stick...I've flown mine with an OS 46FX and 61FX and it's a great flyer. I did change it somewhat, making it a tail dragger and removing the wing dihedral, but it's an easy plane to built and fly.
http://www.rcmmagazine.com/e/env/000...ore-plans.html
http://www.rcmmagazine.com/e/env/000...ore-plans.html