Source for custome wire gear
#2
Join Date: Oct 2002
Location: Chilliwack, BC, CANADA
Posts: 12,425
Likes: 0
Received 22 Likes
on
19 Posts
RE: Source for custome wire gear
Best to just bend your own up. That's what the rest of us do. A wire bender like....
http://www.hobbylinc.com/htm/k+s/k+s326.htm
Or the Harry Higley units like found on...
http://hobbylinc.com/prods/rap.htm
or this super deluxe deal...
http://www.ares-server.com/Ares/Ares...oduct&ID=82819
Other's have made up their own wire benders from flat steet stock and pins to do the same jobs using various features to suit themselves.
http://www.hobbylinc.com/htm/k+s/k+s326.htm
Or the Harry Higley units like found on...
http://hobbylinc.com/prods/rap.htm
or this super deluxe deal...
http://www.ares-server.com/Ares/Ares...oduct&ID=82819
Other's have made up their own wire benders from flat steet stock and pins to do the same jobs using various features to suit themselves.
#3
Thread Starter
My Feedback: (11)
Join Date: Mar 2002
Location: Aurora,
CO
Posts: 441
Likes: 0
Received 0 Likes
on
0 Posts
RE: Source for custome wire gear
Yes, Bruce, I can and have bent my own in the past. These however are for 20 lb plane with 1/4 dia wire, and not exactly straight forward in it's design. I know there is a custome fabricator somewhere...just can't remember who it is.
Thanks. As always, your input is appreciated.
Murphey (As in Murphey's Law)
Thanks. As always, your input is appreciated.
Murphey (As in Murphey's Law)