Bud Nosen 1933 Gere Sport
05-26-2008, 02:20 AM
#1
Senior Member
Thread Starter
Join Date: Sep 2004
Location: Denton,
TX
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Bud Nosen 1933 Gere Sport
I have just recently come across a set of plans for this plane. I'm considering building it. As Large as it is (WS 96.25" top 90.25" bottom Length 79" ) and at a weight of 14.5 lbs. I was wondering if the engine recommendation was a bit off. It recommends and engine displacement of .60-.80. Seems more like a 25-45 cc gasser to me. Anyone built and flown one of these before? Any suggestions would be greatly appreciated. I prefer glow at this point, but am willing to consider gas.
06-03-2008, 12:38 PM
#3
RE: Bud Nosen 1933 Gere Sport
I am currently flying my Nosen Gere Sport at 22 pounds, with Ryobi 26cc 4 stroke.
You can see pictures on my RCU Profile
http://www.rcuniverse.com/community/...ry&memid=37603
Let me know if you have any other questions.
You can see pictures on my RCU Profile
http://www.rcuniverse.com/community/...ry&memid=37603
Let me know if you have any other questions.
05-20-2009, 03:32 PM
#4
Junior Member
My Feedback: (1)
Join Date: Dec 2008
Location: valkenswaardbrabant, NETHERLANDS
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: Bud Nosen 1933 Gere Sport
can i have a copy of this plans?
i have one see http://www.modelbouwforum.nl/forums/...5-meter-2.html
bud i do not have the plan's
i hope that someone can help me.. my e mail = [email protected]
thanks !!
i have one see http://www.modelbouwforum.nl/forums/...5-meter-2.html
bud i do not have the plan's
i hope that someone can help me.. my e mail = [email protected]
thanks !!
ORIGINAL: kbear
I have just recently come across a set of plans for this plane. I'm considering building it. As Large as it is (WS 96.25" top 90.25" bottom Length 79" ) and at a weight of 14.5 lbs. I was wondering if the engine recommendation was a bit off. It recommends and engine displacement of .60-.80. Seems more like a 25-45 cc gasser to me. Anyone built and flown one of these before? Any suggestions would be greatly appreciated. I prefer glow at this point, but am willing to consider gas.
I have just recently come across a set of plans for this plane. I'm considering building it. As Large as it is (WS 96.25" top 90.25" bottom Length 79" ) and at a weight of 14.5 lbs. I was wondering if the engine recommendation was a bit off. It recommends and engine displacement of .60-.80. Seems more like a 25-45 cc gasser to me. Anyone built and flown one of these before? Any suggestions would be greatly appreciated. I prefer glow at this point, but am willing to consider gas.
