kyosho macchi EP
03-16-2011 | 06:52 AM
#1
Thread Starter
Junior Member
Joined: Aug 2007
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
From: AthensAttica, GREECE
kyosho macchi EP
Hallo to all,
I'm in the process of building a Kyosho Macchi M33 EP and although it is the 2nd one I came to a thought(more a question really) and the question is this:
How do I determine of the number of extra capacitors needed according to the length of wires used on my setup.
For your info my setup is as follows:
13x8.5
DUAL SKY 4060 CA-6
ESC HYPERION 90 OPTO
POLYQUEST 5S 5000 25C
With the above setup I get a healthy 715 Watt and a 42 A draw.
Since I am fairly new to your forum pls move my topic if it is in the wrong section.
I'm in the process of building a Kyosho Macchi M33 EP and although it is the 2nd one I came to a thought(more a question really) and the question is this:
How do I determine of the number of extra capacitors needed according to the length of wires used on my setup.
For your info my setup is as follows:
13x8.5
DUAL SKY 4060 CA-6
ESC HYPERION 90 OPTO
POLYQUEST 5S 5000 25C
With the above setup I get a healthy 715 Watt and a 42 A draw.
Since I am fairly new to your forum pls move my topic if it is in the wrong section.
03-31-2011 | 07:09 AM
#2
Member
Joined: Apr 2005
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
From: Seffner,
FL
RE: kyosho macchi EP
I dont recall formula at this time but take a look at this in the meantime
http://www.fromeco.org/products/05frcdcupm2/
http://www.fromeco.org/products/05frcdcupm2/
