Help with RC build
08-20-2007 | 07:17 PM
#1
Thread Starter
Member
Joined: Aug 2007
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
From: punta gorda,
FL
Help with RC build
just got my controller , servo, reciever and esc in the mail. ive connected my motors both 2 the one esc and connected the esc to both channels and i get no engine response on either one but i get response from the servo on both. there is also a connect seperate from channels callled the BEC. im not sure where the problem is but the esc is a 20/30 amp 9.6v and the motors are 400 graupners.
08-22-2007 | 03:19 PM
#3
Senior Member
Joined: Jun 2006
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
From: mcyville,
WI
RE: Help with RC build
make sure the order of color of the wires is he same as the servo. alot of newer esc's don't have a tab so they can go in the reciever two ways.
is there really a fat ***** florida?
is there really a fat ***** florida?
