Aquacraft SV speedo not arming
#1
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Clawson,
MI
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Aquacraft SV speedo not arming
Alright guys,
At this point I am a little frustrated. [:@]I am trying to arm the Aquacraft speedo with my stick radio. These are the steps that I am currently taking
1. turn on TX
2. plug in batteries
3. contoller starts beeping and I move the throttle to full forward. The contoller beeps once (as it's supposed to)
4. I move the throttle to full reverse. The controller beeps once (again, as it'
s supposed to
5. I let the throttle go back to neutral and I get Nothing!!!!
I am sure it's a setting on the radio, but I know 98% of you use wheel radio's. Any one have any suggestions?
Thanks
Mike
At this point I am a little frustrated. [:@]I am trying to arm the Aquacraft speedo with my stick radio. These are the steps that I am currently taking
1. turn on TX
2. plug in batteries
3. contoller starts beeping and I move the throttle to full forward. The contoller beeps once (as it's supposed to)
4. I move the throttle to full reverse. The controller beeps once (again, as it'
s supposed to
5. I let the throttle go back to neutral and I get Nothing!!!!
I am sure it's a setting on the radio, but I know 98% of you use wheel radio's. Any one have any suggestions?
Thanks
Mike
#2
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Clawson,
MI
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: Aquacraft SV speedo not arming
I got it... Thanks for your help. Turns out I was reversing channel 1 (steering) and not channel 2 (throttle)
Thanks again
Mike
Thanks again
Mike