why didnt you send him Private emails inquiring about the XLX2???

You hear it?

let me find the other video.

Im not smart as Ralph but if you want to talk about you design with me Im all for it. :cool:

Hubert

Sounds great Chris!

Definitely OPTIMAL running :cool:

Thanks
Hubert

It would be embarrassing if i fired up the align or any castle/neu I own through video sir. Im gotta cut it off because it is awful to my ears in almost the entire rpm range.

Thats a noisy MF that you can keep. Ivaylo Goronov aslo says the Neu is cleaner on his scope.

if you want to talk about it we can. Remember no ad hominem just the facts. I can put this on a RTA.....and post it of youd like. I even sense the RFI in the *****.

Now thats SPECIAL...https://cimg2.ibsrv.net/gimg/www.rcu...44c9584eb8.gif

Regards,
Hubert

Ralph im quite sure your single conductor wye wound motors do not sound like this under freeload rpm.

YOU CHECK IT AND SEE!

is how you deal with skywalker on RCN. Im sure the troupe understand that THIS certainly isnt the outlier in low RFI!

Itz truly horrible.

My first year wrestling I won the conference they begged me to continue but the weight wass 155 and that affected my football so i left it alone. wrestlers get about 4 scholarships a year and I went to OU for football buddy .

https://cimg3.ibsrv.net/gimg/www.rcu...d7768a0c96.jpg

I was also accepted as a junior there with an Academic High school diploma so I had the grades too!!! Talk what you know about me which is zero! U don't know coach Switzer Brian Bosworth or Keith Jackson! Nobody from my world was a sucker or a nerdy ass twerp on the side lines pal! U claim you were college exempt but obviously should have taken those classes.

And lastly

YOU DONT HAVE ANYTHING TO SAY ABOUT ALL THE NOISE YOUR MOTOR MAKES UNDER COMMUTATION?

YOU AND RALPH SCARED TO SHOW BATTERY CONSUMPTION NUMBERS BESIDE A "STARTER" MOTOR?

whats up with you motor Fuhrers ???

Running ya mouth but im right here with a real degree!!

Black Karma "POC" Edition
Total losses 74.6 ! https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Copper .1 watts https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Iron 73.6 watts https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Esc .8 wattshttps://cimg4.ibsrv.net/gimg/www.rcu...6d47e82914.gif
Battery .1 watt https://cimg4.ibsrv.net/gimg/www.rcu...6d47e82914.gif
Kt= 11.55m Nm/amp
Km = .1639 Nm/Sqrt watts
Power Density 59.88[Km²/g]
Maxon Eq 1.92 Max Eta 96%

U come here running ya mouth about harmonic reduction without a single scope or PA in site.

Brother PLEASE!!!:rolleyes:

Posting on forums? NO bruh go work on all that damn commutation noise!!! b4 u try to say a word here about superior engines. Thats audible trash! Ralph can follow you and work on his incredibly high idle currents that crescendo into 93% and 93.5% for all you did which is run of the mill.... Stick to the facts and comparative consumption numbers you wont post here for the "Anglophiles" as you call them!

Currently Active Users Viewing This Thread: 4 (3 members and 1 guests)
Clugh*, BOHO1, CHX3

SPEAK ABOUT IT!!! The diagnostic measure

or his mouth because he even calls Caucasian Americas (Anglophiles) aka the ass kissers of the queen of England. Is that flattering to his American fan base? and for that youre going to break bread with him?

Are you serious?

No way!

And then with the same mouth post the battery consumption numbers and losses to ya machine. You scared to post that? U already know its an 66% increase in throughput power at my Eta...

Black Karma "POC" Edition
Total losses 74.6 ! https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Copper .1 watts https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Iron 73.6 watts https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Esc .8 wattshttps://cimg4.ibsrv.net/gimg/www.rcu...6d47e82914.gif
Battery .1 watt https://cimg4.ibsrv.net/gimg/www.rcu...6d47e82914.gif
Kt= 11.55m Nm/amp
Km = .1639 Nm/Sqrt watts
Power Density 59.88[Km²/g]
Maxon Eq 1.92 Max Eta 96%

You could also take the advice you gave Rooman.

CHX LRK Motor
Registered User
https://www.flyinggiants.com/forums/...ar100329_1.gif
Deutschland, BY, Gräfelfing
Joined Dec 2022
64 Posts
Distance From You: 4455 miles

"Hi rooman,
How about if you would contribute something useful. For many, the information Hubert provides here is very valuable."

Happy Amps Christian

this post was made less than 60 days ago :o

Attachment 227282703-20-2023, 06:36 PM

Now! you can all go back to OSE and see what he did there when I tried to let them know a castle inverter can run a tetras. Now that im gone he contributes zero to OSE electronics understandings !!!

he told you my wooden scale was heavy but as is it is under 5 pounds and it posted on the scale in photo. He says that and has never built a scale boat!

Balsa is actually lighter than carbon fiber and end cut balsa has major compressive strength .

On Sun, May 14, 2023 at 10:55 AM Steve Gualtieri <[email protected]> wrote:Hubert,


I'm boxing up your hull/parts. I just got in from my guy the wing stabilizer kits. It's been over a year since I had them. The kit is $145.00 on the website, I will sell it to you for $135.00
Let me know if you would like to order one and I'll add it to your order. I can send you a PayPal invoice.


Thank you,
Steve Gualtieri
RC Boat Company Inc.
https://ecp.yusercontent.com/mail?ur...p9N8GydiKw--~D

He has the stabilizers so the boys better hurry quick they wer on backorder over a year. I told him send me mine b4 they run out!

U aslo see the German boat ambassador refuses to address battery consumption or the commutation noise so yes there is no truth to these two they hide the inferior numbers!

Remember that! from this day forward. Itz a difference between me and them . If i wind a piece of trash ill just say so....!

These cats and their motors are as fallible as anyone else so Americans stuck on the German superiority stereotype can stop with your heads up their German az!

We have excellent quality coming directly from US and we have at least ONE winder that can compete with anything these exclusive European do.

ME

HUBERT "The Strange American" as Ralph calll me so that is a declaration that he has never met one quite like me and he is right. I don't follow crowds or Lucas im an independent thinker and genius if there is even such a thing. I have a deep relationship with my spirituals roots so of course he cannot understand an Asiatic black man that is not impressed simply because he waves a German flag that's no more prestigious than our own.

I was made in America so I'm truly authentic in everything I do.

We call it. Keeping it real!

And I will never lose a tech challenge to a forum amateur mad he cannot generate my levels of interest with zero degrees and a silver spoon of the German Privilege in his mouth.

Even though im clearly number 1 at 96.1 their motors were not even close. Christian cannot wind the big wire so he solicits My AMERICAN hands!!!

Over and out
1B.

Hubert,


I sent you an invoice for the wing stabilizer bracket kit.
Thank you,
Steve Gualtieri
RC Boat Company Inc.
https://ecp.yusercontent.com/mail?ur...VYyBfrdymw--~D

We will be at 100k in a few days. Today maybe LOL

Boaters bear with me why I show the Germans something and get the 664 views to reach 100K views.

ESC Myxa and Komar DC Power Wire Lengths Added Capacitance

SupportTelega electric propulsion
myxakomar
May 11
1 / 2
May 11
4dAttachment 2272829
Mattdynamicmelody
5dWe’re using the Zubax Myxa and Komar ESCs in our small-scale models, and some ESC DC power wire lengths are fairly long (~1m). I know that the length of the wire changes the inductance which causes the voltage to be noisy, and I was wondering what length of DC power wire the Zubax Myxas and Komars are rated for with the onboard capacitors? Do you guys have a recommendation for adding capacitance across the positive and negative DC power wires on these ESCs per unit length of DC power wire (such as uF/m)?

Thanks!

• Myxa hardware fault after high current spinup

• created

  Attachment 22728305d

• last reply

  Attachment 22728314d
• 1

  reply

• 17

  views

• 2

  users

• 1

  like

• 2

  links

Attachment 2272831
Pavel KirienkoCEO & CTO
4dThis depends not only on the resistance and inductance of the wires (which are affected by their material, cross-sectional area, length, the geometry of their routing, nearby metallic objects, and of course, the connectors and their contamination) but also on the internal resistance of the battery. It is quite difficult to account for all the involved variables, so we recommend empirical observation instead. Run the drive at the maximum power and measure the DC link voltage ripple at or near the controller. If the ripple does not exceed the recommended limits stated in the Telega Reference Manual, you do not need additional capacitance:

An empirical rule we have observed is that 20 μFADC is sufficient for most applications with short DC link wires. More information on this is given in the Mitochondrik LV datasheet, section “DC link capacitance” 2.

Blog

May 14

Altium Designer and Eagle libraries for the Mitochondrik-LV motor control module

https://ecp.yusercontent.com/mail?ur...mqJEPS.O1Q--~D

Pavel Kirienko

pavel-kirienko
https://ecp.yusercontent.com/mail?ur...okgJPSxKpw--~DCustomers designing products around Mitochondrik-LV will benefit from the CAD libraries shared in this repository:

Now give it time and watch them roll in. Its around 2 oclock there watch this.....:cool:

A report button will not change the fact that this information will not be posted by Ralph Okon or Christian Lucas


Black Karma "POC" Edition
Total losses 74.6 ! https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Copper .1 watts https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Iron 73.6 watts https://cimg5.ibsrv.net/gimg/www.rcu...3912982b72.gif
Esc .8 wattshttps://cimg4.ibsrv.net/gimg/www.rcu...6d47e82914.gif
Battery .1 watt https://cimg4.ibsrv.net/gimg/www.rcu...6d47e82914.gif
Kt= 11.55m Nm/amp
Km = .1639 Nm/Sqrt watts
Power Density 59.88[Km²/g]
Maxon Eq 1.92 Max Eta 96%

To me its quite apparent that the Lener 41 series designed by Christian Lucas cannot do this nor can Ralph Okons Skorpions. If they can beat it post this data!

Period.

96.1 % is a 66% increase in throughput power as compared to 93%

You will never report these facts away they will just post somewhere else.


Regards
Clugh Motors

https://cimg8.ibsrv.net/gimg/www.rcu...31ef7fbe94.png.

If no American supports me how are we now only 142 views from 100,000 which is more than them combined???

Im supported by
APD
Castle
Neumotors
Zubax Electronics
Dieter Gerling
Kosta Kanellis
Sariful Islam
David Dorell

and more

I cannot count all the engineers that have shared their scribes and blessings with me.

The boats illegal or you show the photo with the straight edge across it. Keep it real with yaself that solves it all and clearly not possible to produce such a FACTUAL photo! or one showing a straight V!!!


and about a a million views total. To say I have no support when not one of their threads has even 65 thousand is quite a bit of UNDERSIGHT

u have to add them together to have my following Those are the facts verifiable by the clearly viewable numbers

Im sorry but it wont be long at this rate u can estimate that by morning that 100k plateau will be reached and will continue to grow even without me on a board. The daily winders news still holds 7 - 10 active viewers a day!

Currently Active Users Viewing This Thread: 10 (2 members and 8 guests)
Clugh*, BOHO1

I dont have to beg for interest . As long as I maintain such an advantage as 3.5% ir state of the art inverters that run QUIETLY they will follow me to the moon.

youtu.be/8s22PZRXAIY

Try again Ralph links no good. I do not have a motor in my camp that is this noisy. You cannot dismiss it!!!

Since you took it public, nobody is reporting anything but since it was previously reported I skim the thread every day or so. Post all the information you want, take pot shots and the posts will be removed. I dont have the patience or quite frankly the interest to read every post, if I see it its out, if I see it again....well you know what will happen.

Thanks.

Also, please don't send me PM's (and I'm addressing anyone reading/participating in the thread) about what is or isn't fact, I don't know the subject and again, quite frankly, I don't care. Say what you want, contradict it with facts or opinions all you want as long as its respectful and not personal.
I realize it's in some peoples DNA to be snarky, trust me I used to ref hockey and get cussed at by 8 year olds and parents alike. But it won't be tolerated here.

Like ive posted do you want to see it on a rta?