RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Speed - Electric (https://www.rcuniverse.com/forum/speed-electric-109/)
-   -   Villian EX (https://www.rcuniverse.com/forum/speed-electric-109/2255032-villian-ex.html)

eman15 10-14-2004 08:25 PM

Villian EX
 
I know alot about the Villian EX, I just dont know how fast it is. Does anyone here know the top speed for the Villian?

djcmeeks 10-15-2004 10:56 AM

RE: Villian EX
 
There seem to be many opinions about this speed of the Villain but the most consistent I have seen would be 17-20mph stock. I have an EX that I am modifying. I have talked to a few others that have done the same mods I am working on and they are getting around 30mph. It is possible to modify to go faster than 30mph but the hull is too unstable at that point and very hard to control.

eman15 10-15-2004 01:39 PM

RE: Villian EX
 
djcmeeks,

What kind of mods are you adding?

djcmeeks 10-19-2004 04:03 PM

RE: Villian EX
 
My Completed Upgrades Include:

Water Cooled Brushes
Water Cooled Motor Cans (Standard Coil)
Upgraded All Wiring to Deans 12 guage wire
Upgraded Connectors to Deans
Upgraded ESC to RC Hydro's Penguin PG-1024/90W 90 amp, 10-24cells
Upgraded Shafts to Octura
Upgraded Props to Octura X447 Beryllium Copper

Current Upgrades I am working on:

Installing AutoBailer
Relpacing Motors w/ Monstor Maxx Wild Pro's
Changing Pinions to 12T
Install Turn Fins
Making 2 - 7 cell GP3300 Packs (Currently Running 2 - 6 Cell 3000mah Packs)
Remove the Decals and Paint the Hull

Androdz 10-26-2004 12:58 PM

RE: Villian EX
 
If you are already thinking of upgraded a villain ex, then please dont get that boat, I got it and I sold it, It is to costly to upgrade everything and still you wont be able to break the 30mph due to the limitations of the hull. Try getting a boat from finedesignrc or others to get some nice speed out of the box. On my villain EX I paid 290 for it, 90 for propellers, 12$ water cooling, 3$ autobailer, Brushcooling. so thus its close to 420$ or so and even with that the gears strip everytime u take a hard corner because they bind. Steer away from it if your looking for speed.

Att. Andrew

kawi 10-30-2004 10:28 PM

RE: Villian EX
 
djc, you have some nice mods, when your done you should hit 35mph on 6 cell, you shouldnt use 7 becasue trinity sais you cannot with the monster motors. but if u go ahead.:D

If you want more speed try inboard rotation, it makes it crazy though.

traxxas sais on 7 cells the villain ex will do 20-24, 6 cells id say 16-20, most people hit 18

crazyboutrc1227 11-04-2004 07:24 AM

RE: Villian EX
 
do you have to get a new ESC if you upgrade to the Trinity Monster Max Wild motors?

kawi 11-05-2004 07:34 PM

RE: Villian EX
 
no, jsut make sure you run 6-cells, the motors arent made for 7 cells, i reccomend the milds, there 21 turns but thats in between the titans and the wilds, and 3 turns over the esc limiter, so it should work perfect.

surfa247 12-25-2004 11:45 PM

RE: Villian EX
 
Hello, I am thinking about selling my old Villain IV to get a newer Villain Ex, I need to know if this is a good reliable boat that combines all the necessities (speed, turning, etc..) into the stock RTR package?


All times are GMT -8. The time now is 05:41 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.