proboat mini v
 

ok. heres my idea. proboat mini v, with a mamba brushless system (6800) with a two or three cell lipo battery, and i dont know what receiver. can anyone provide me with some information on other options for this boat, or links to it/them. Is this a good idea? will i have cooling issues? is there a waterproof receiver i could get? any thoughts on this idea will help me alot. thanks everyone.

RE: proboat mini v
 

too bad, the kind of official thread was pushed to the next page of threads

http://www.rcuniverse.com/forum/m_5521619/tm.htm

RE: proboat mini v
 

same motor 33amp cont. lots of water cooling started at 3c down to 1c I think 50mph is a little to fast

RE: proboat mini v
 

animalnut; the min-v wasn't designed to go over 22mph or they would have mentioned speed when advertisied the 14" boat.

RE: proboat mini v
 

Very nice work animalnut, what motor is that and where did you get the water jacket for the motor?
Put your camera in Macro mode, those pictures are blurry

RE: proboat mini v
 

sorry about the pics but it is a6800 and the water jacket is solid fish tank tubing and o-rings and a 3c lipo will give you a high speed run that will make you nervous it just took a little time n patience but smallest and fastest micro v iv,e seen