|
propchoise
im getting pretty long runtimes with the mogli. I havn't checked but it feels like 8 minutes maybe. And on 5000mah thats about 40A. Im running a x637, feigao 9L and 3s2p lipo. esc is cool lipos and motor around 90F exept for the shaft on the motor wich sometimes can be really warm. I was thinking about changing prop to a x640 or a prather 215. would it work with my setup or will I burn everything??
I think it shouldn't work but at the same time I think I should be pulling a lot more amps on my current setup. What do you guys think?? |
RE: propchoise
Try a 215, check temps often!
|
RE: propchoise
will do that.
do the prather props need balancing and sharpening?? |
RE: propchoise
Yes. i believe they do
|
RE: propchoise
ORIGINAL: joccee will do that. do the prather props need balancing and sharpening?? |
RE: propchoise
okay..thanks.
I decided to go with a graupner prop wich is closer jump from the 637 I have now. the graupner prop is 40mm dia and 59mm pitch - this is just an icrease of the diameter(637 is 37x59.2). will this give more speed or will it just accelerate faster? |
| All times are GMT -8. The time now is 12:36 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.