|
nitro brushless conversion
ok i need some advice, I have a 1/12 proboat nitro hydro should I try to convert it brushless or should I just get the ul1. I have been reading and found the ose has the ul1 motor esc combo,coupler,ect for around 200. I can get the ul1 for 269 shipped from tower.
What should I do? Dave |
RE: nitro brushless conversion
UL-1.........fast boat out of the box and a warranty.
|
RE: nitro brushless conversion
thats what I was thinking rebuilder now I just need to figure out what to do with the extra boat,does anybody know what it would be worth and should i part it out or sell it rtr. It is somewhat upgraded with a tlr rudder,turn fin,and the motor was modded by tlr,balanced and sharpened y535 prop also.
Dave |
RE: nitro brushless conversion
ORIGINAL: 02ram4by4 ok i need some advice, I have a 1/12 proboat nitro hydro should I try to convert it brushless or should I just get the ul1. I have been reading and found the ose has the ul1 motor esc combo,coupler,ect for around 200. I can get the ul1 for 269 shipped from tower. What should I do? Dave I'm getting low 50s with mine... You could have your motor modded in the nitro and add a good prop and have a decent nitro to go with your bullitt UL-1 :D |
RE: nitro brushless conversion
But you could do a brushless conversion with the ProBoat
with this esc http://www.hobbycity.com/hobbyking/s...idProduct=8937 and this motor http://www.hobbycity.com/hobbyking/s...hless_Inrunner and this motor mount http://www.offshoreelectrics.com/pro...prod=etti-h010 running on 4s should ripp real good! could be just as fast as my UL-1 |
| All times are GMT -8. The time now is 07:31 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.