Miss Merion Bluegrass
#1
Thread Starter
Miss Merion Bluegrass
Hi All
here is my 46 inch hydro design. that looks something like the Miss Merion Bluegrass. I have alot more done. but need to trim the edges on the top before I take more pictures. nothing scale about this hydro. I built it to fit the 26cc engine. it has been a very fun build from drawing up my design to building it. I am starting the cowl this weekend. Craig
here is my 46 inch hydro design. that looks something like the Miss Merion Bluegrass. I have alot more done. but need to trim the edges on the top before I take more pictures. nothing scale about this hydro. I built it to fit the 26cc engine. it has been a very fun build from drawing up my design to building it. I am starting the cowl this weekend. Craig
The following users liked this post:
murci (03-12-2023)
#2
Senior Member
Join Date: Jan 2005
Location: blackpool, UNITED KINGDOM
Posts: 11,390
Likes: 0
Received 2 Likes
on
2 Posts
RE: Miss Merion Bluegrass
Looks good mate,id add some ridepads to the sponsons though,you dont want too much of an angle on the inside of them they need to be flatter or close to 90% to sponson inside edge at the sponson transom.Looking at your pic yours looks angled but it might be my eyesight lol.Heres the bottom of my Rocket hydro.
Mart
Mart
The following users liked this post:
murci (03-12-2023)
#4
Thread Starter
RE: Miss Merion Bluegrass
Hi Mart
you have 20/20 vision! the bottoms do have a small angle and I built the ride pads into the bottoms. it is hard to see. but they stick up about 3/16. I wanted to buy a zippkits hydro. but they are all sold out? yours looks really nice. they will be a blast to run. more pictures soon. Craig
you have 20/20 vision! the bottoms do have a small angle and I built the ride pads into the bottoms. it is hard to see. but they stick up about 3/16. I wanted to buy a zippkits hydro. but they are all sold out? yours looks really nice. they will be a blast to run. more pictures soon. Craig
The following users liked this post:
murci (03-12-2023)
#6
Thread Starter
RE: Miss Merion Bluegrass
here is what I worked up for my cowl. it will look alot like the Miss Merion. but not perfect. I wish someone would share the plans?? from what I have researched no one knows where thay are. Bummer) Craig
The following users liked this post:
murci (03-12-2023)
The following users liked this post:
murci (03-12-2023)
#8
Thread Starter
RE: Miss Merion Bluegrass
Hi All
I have the top on now. it is a cool boat. once I get the cowl done it will be a beast! my paint scheme will be SGT. Rock. with Calvin on the side of the hull peeing killroy was here. decals are in the works. got to run Craig
I have the top on now. it is a cool boat. once I get the cowl done it will be a beast! my paint scheme will be SGT. Rock. with Calvin on the side of the hull peeing killroy was here. decals are in the works. got to run Craig
The following users liked this post:
murci (03-12-2023)
#9
Thread Starter
RE: Miss Merion Bluegrass
here are the decals Callie Graphics is making for me. the hull will be olive drab and I will add some white stripes and a GI joe for a driver. nothing over the top but a fun theme. Craig
The following users liked this post:
murci (03-12-2023)
#10
Thread Starter
RE: Miss Merion Bluegrass
Hi Guy's
I have to go get some more epoxy and sandpaper. but here is what I have done so far today. I will have it sanded to shape later today. more pic's soon. Craig
I have to go get some more epoxy and sandpaper. but here is what I have done so far today. I will have it sanded to shape later today. more pic's soon. Craig
The following users liked this post:
murci (03-12-2023)
The following users liked this post:
murci (03-12-2023)
#13
Thread Starter
RE: Miss Merion Bluegrass
Hi Guys
work has been a BEAR, lots of overtime after the U of I students let out for the summer. so here is the cowl. I will be glassing it Sunday. still some putty work to do on the hull. but she is a Beaut! Craig
work has been a BEAR, lots of overtime after the U of I students let out for the summer. so here is the cowl. I will be glassing it Sunday. still some putty work to do on the hull. but she is a Beaut! Craig
The following users liked this post:
murci (03-12-2023)
#14
Thread Starter
RE: Miss Merion Bluegrass
Hi Guy's
here is the best way to make those special parts for your models. not hard to do. you will have the coolest stuff on the pond. American Engineering remember those days. so give it a try. you will have fun!!![:-]
here is the best way to make those special parts for your models. not hard to do. you will have the coolest stuff on the pond. American Engineering remember those days. so give it a try. you will have fun!!![:-]
The following users liked this post:
murci (03-12-2023)
#15
Thread Starter
RE: Miss Merion Bluegrass
Hi Guy's
I found a liberty classics scale motor surfing the net. should look great in the cowl. Craig
http://www.collectablediecast.com/
I found a liberty classics scale motor surfing the net. should look great in the cowl. Craig
http://www.collectablediecast.com/
#17
Thread Starter
RE: Miss Merion Bluegrass
sorry mart look in liberty classics. it is a 1/6 full blown hemi. will be very cool scale effect. 44 dollars had to get it)) I think it is a match to what the Miss Merion had! Craig
#18
Thread Starter
RE: Miss Merion Bluegrass
Hi Guys
I fitted the motor today. it is a nice match!! you almost wish this could be a real boat. Mr, Wham had a very COOL ride. Craig
I fitted the motor today. it is a nice match!! you almost wish this could be a real boat. Mr, Wham had a very COOL ride. Craig
The following users liked this post:
murci (03-12-2023)
#19
Thread Starter
RE: Miss Merion Bluegrass
Hi Guys
someday we may get to see the Miss Merion run again. found this today. researching these boats is an on going thing. today was a great day. there are plans out there for this hydro. I can only hope to get a set?? [:'(]
http://www.network54.com/Forum/15733...rion+Bluegrass
someday we may get to see the Miss Merion run again. found this today. researching these boats is an on going thing. today was a great day. there are plans out there for this hydro. I can only hope to get a set?? [:'(]
http://www.network54.com/Forum/15733...rion+Bluegrass
#20
Thread Starter
RE: Miss Merion Bluegrass
Hi all
the Miss Merion is coming along. I have all next week off. so I hope to pretty much get it finished. then I will take it to steve to paint.
the Miss Merion is coming along. I have all next week off. so I hope to pretty much get it finished. then I will take it to steve to paint.
The following users liked this post:
murci (03-12-2023)
The following users liked this post:
murci (03-12-2023)
The following users liked this post:
murci (03-12-2023)
#24
Thread Starter
RE: Miss Merion Bluegrass
I hope mine sounds this great!! this is the new hydro they built. Earl Wham has to be on cloud nine. his Baby is back) she is a Beaut! and the sound of the big block is awesome. is that Kong?????
http://www.youtube.com/watch?v=c4xIw30nlz4
http://www.youtube.com/watch?v=6l-SK...eature=related
http://www.youtube.com/watch?v=c4xIw30nlz4
http://www.youtube.com/watch?v=6l-SK...eature=related
#25
Thread Starter
RE: Miss Merion Bluegrass
I hope everyone had a great Turkey day. I eat to much for sure. sprayed some paint. it will be a great model. but these hulls are very unforgiving they show all those areas you missed. I should have sanded more? but it is awesome. I will decal it tomorrow. Craig
The following users liked this post:
murci (03-12-2023)