Expresscraft MTI built w/inlines
#26
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
Hey Paul
Very cold here too! 25 degrees .
I can't get my camera to communicate with my computer .
I reloaded the program for the camera still no luck!
I think my camera is done !!!
Steve
Very cold here too! 25 degrees .
I can't get my camera to communicate with my computer .
I reloaded the program for the camera still no luck!
I think my camera is done !!!
Steve
#28
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
Thanks Rick
I tried that and it was one of the first things I tried.
My camera has been giving me trouble for a while and I think it shot!
time for a new one ! [&:]
Steve
I tried that and it was one of the first things I tried.
My camera has been giving me trouble for a while and I think it shot!
time for a new one ! [&:]
Steve
#29
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
ok Rick
you were close, all USB ports were turned off some how ? fixed
build up dates of the work past few days. only a few hours of actual work !
more pic's of drive and rudder polished installed
motor in it's place but not mounted yet .
radio box in it's place not mounted yet !
Hitec Digital servos
Steering HS-5745MG Torque 4.8/6.0v : 208 / 250 oz
Throttle HS-645MG Torque 4.8/6.0v : 143 / 168 oz
Steve
you were close, all USB ports were turned off some how ? fixed
build up dates of the work past few days. only a few hours of actual work !
more pic's of drive and rudder polished installed
motor in it's place but not mounted yet .
radio box in it's place not mounted yet !
Hitec Digital servos
Steering HS-5745MG Torque 4.8/6.0v : 208 / 250 oz
Throttle HS-645MG Torque 4.8/6.0v : 143 / 168 oz
Steve
#31
Senior Member
Join Date: Jan 2003
Location: Toms River,
NJ
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
Very very nice, How can you put that high polish in the water. Now I'm going to step up my build. Cant wait to see it. Nice work!!
#33
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
yes it's a Dr. Bucks Radio box
Thanks, firefox144, and Owner of XXX boatworks [8D]
Hey Raj , nice picture you picked, looks very fast !!!!
I thought you would have put your 84" Apache up there, but the bike is very nice.
Steve
Thanks, firefox144, and Owner of XXX boatworks [8D]
Hey Raj , nice picture you picked, looks very fast !!!!
I thought you would have put your 84" Apache up there, but the bike is very nice.
Steve
#35
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
Hi Raj
No, it looks like the exhaust system was made for the hull . the fit is mint.
I put the exhaust tips I got from you for the Sig on the MTI, the tune pipes are 1' away on front engine and 2" way on back engine.
I'm thinking of making the exhaust exit all 4 tips for a scale look. the tips are lost with the over hang on the MTI though!! [:@]
Steve
No, it looks like the exhaust system was made for the hull . the fit is mint.
I put the exhaust tips I got from you for the Sig on the MTI, the tune pipes are 1' away on front engine and 2" way on back engine.
I'm thinking of making the exhaust exit all 4 tips for a scale look. the tips are lost with the over hang on the MTI though!! [:@]
Steve
#37
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
ORIGINAL:
Awesome build, are you using thru the hull water pick ups?
Awesome build, are you using thru the hull water pick ups?
yes, thru the hull water pick ups are planed, I have not installed them yet, other things to do first as I just started this build !
I will post more pic's later this week .
Steve
#42
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
Ok Rick
I'm working on a boat have not posted as well, now you made me spill the beans.
I also have done some work on my Budweiser hydro with a Sikk 27 in that hull .
My son has a boat I've been helping him with too ! Arrow Shark Deep Vee
I've been busy ! MTI will get done for the Fun run!
Steve
I'm working on a boat have not posted as well, now you made me spill the beans.
I also have done some work on my Budweiser hydro with a Sikk 27 in that hull .
My son has a boat I've been helping him with too ! Arrow Shark Deep Vee
I've been busy ! MTI will get done for the Fun run!
Steve
#43
Senior Member
Join Date: Nov 2006
Location: Browns Mills,
NJ
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
Dude I don't even have a boat and I've posted more progress than you! LOL
Just busting this place has been such a downer for the last few days.
Just busting this place has been such a downer for the last few days.
#45
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
work done this week
added exhaust tips from XXXboatworks ! who else lined them up with tuned pipes, only 2 tips will be used !
through hull water pickups installed and auto bailers are in.
Stringers extended glassed in and bolted for extra support
gas tank mount installed , I made a aluminum bracket to hold the fuel filler
a few more things do and off to be painted ![
Steve
added exhaust tips from XXXboatworks ! who else lined them up with tuned pipes, only 2 tips will be used !
through hull water pickups installed and auto bailers are in.
Stringers extended glassed in and bolted for extra support
gas tank mount installed , I made a aluminum bracket to hold the fuel filler
a few more things do and off to be painted ![
Steve
#49
Senior Member
Join Date: Nov 2006
Location: Browns Mills,
NJ
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
Looks great, 'bout time you stopped typing and started building.
Can't wait for my hull to arrive... I'm so stir crazy with nothing to work on.
All I can do is type but that's getting me in trouble now..
Can't wait for my hull to arrive... I'm so stir crazy with nothing to work on.
All I can do is type but that's getting me in trouble now..
#50
Thread Starter
My Feedback: (1)
Join Date: Oct 2002
Location: Long Island,
NY
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
RE: Expresscraft MTI built w/inlines
Thanks guys
cooling lines, fuel lines and radio box to get done ! yeah paint too !
graphics are in the print shop now, should be done by the weekend .
I have to get this build done soon, my next build will be coming very soon !
My next build is Expersscarft ? I will post pic's when it gets here !
Steve
cooling lines, fuel lines and radio box to get done ! yeah paint too !
graphics are in the print shop now, should be done by the weekend .
I have to get this build done soon, my next build will be coming very soon !
My next build is Expersscarft ? I will post pic's when it gets here !
Steve