zip kit hydros motors set up
04-04-2008, 09:26 PM
#2
RE: zip kit hydros motors set up
Oh boy, not this again!!
A NAMBA district was going to make the class Zen's only because of the HP and RPM advantage over the Zen's. To make matters worse, they wanted to make the minimum size 48" which would disqualify the Zipp Kits hulls. Needless to say, that didn't go over too well.
This doesn't affect you as you're in Oz but if you have any plans on racing you might want to see what the AMPBA has to say.
A NAMBA district was going to make the class Zen's only because of the HP and RPM advantage over the Zen's. To make matters worse, they wanted to make the minimum size 48" which would disqualify the Zipp Kits hulls. Needless to say, that didn't go over too well.
This doesn't affect you as you're in Oz but if you have any plans on racing you might want to see what the AMPBA has to say.
04-05-2008, 12:16 AM
#4
Join Date: Mar 2007
Location: Rockaway,
NJ
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
RE: zip kit hydros motors set up
There are currently no national rules for the thunderboat class in NAMBA. There is a set of national rules being voted on in NAMBA right now that specify a minimum length of 48" and a minimum width of 24" and it also specifies a stock 26cc Zenoah engine, a 257 carb is allowed. Doug
04-05-2008, 12:18 AM
#5
Join Date: Aug 2005
Location: Perth, AUSTRALIA
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
RE: zip kit hydros motors set up
ORIGINAL: jimmy 1987
ok i am thing of racing but where do i go to see the race rules
ok i am thing of racing but where do i go to see the race rules
Have a read through them all, additionally, it may pay to touch base with one of the clubs in Queensland in your area. Talk to the guys there, you'll find them to be a wealth of information.
Johno
