aussier6er

My Feedback: (-1)

hi do any of you guys know what make of hull this is ??

i bought it a while back
just trying to find out what make of hull it is
it looks as though it could be a jet boat from the shape of the hull it is 40 inches long and

thanks guys

Justaddwata

My Feedback: (3)

Looks like a jet sprint style hull but it does not look like any of the commercially available hulls I am familiar with.

The flat vee leads me to believe it is for a jet pump. Similar to this swashdrive bottom I imagine - http://imageevent.com/justaddwata/my...=0&w=4&s=0&z=4

PEERPSI

Okay two questions Matt.

One, are you planning on starting an RC boat museum? You seem to have a sample of, well, everything including propellers.

Two, are you trying to get me fired? Every time you send out a picture link I spend a half an hour, at the least, on the computer at work gawking. The Miss Geico replica cost me two hours of my life I'll never get back.

Recognized Dasboata, Chris, in one of the pictures. Was he bringing you a new shipment?

Scott Schneider

Agree, looks to be a delta keel hull likely design for SQUIRT propulsion ....
And being your in OZ, very likely !!

Check: Swashdrive

Justaddwata

My Feedback: (3)

Scott - it looks quite different in profile to the swashdrive hulls I have seen thus far but could be an early prototype.

aussier6er

My Feedback: (-1)

i also havent seen this shaped hull before but i am familiar with the swashdrive hulls and thought that i was similar to those !!!
oh well i will put it back into storage as i have no use for a jet boat hull !!

any ideas how it would handle with a stinger drive unit on it ??

Scott Schneider

Using GAS power such as a Zenoah 260 or RCMK, if OAL is 45" or better it should work. If stubby like 40" give or take .... Shelve it, it is a squirty [:'(]

swashdrive

Gday All

Definatley not one of my hulls, but looks like someones interpretation of a jetboat !
Heah Matt you wanna hang on to that Swashdrive Jetsprint,
will become very rare oneday as i'm not making these things anyore !
Looks like your keeping it in good nick
Regards
Craig

STEVE MARSHALL

I would get into the black paint on the inside with a bit of thiners and a rag and see if you can uncover a makers lable???
Steve

STEVE MARSHALL

Take a look at this thread, something might look the same.
http://www.rcuniverse.com/forum/m_79..._1/key_/tm.htm

ExpresscraftLisa

Hello their well doll.I can tell you that this is NOTone I built.But it may be a PRATHER. visit the web sight atexpresscraft.com and you can see the boats I build.Hey have a good day