need help
07-26-2009, 12:28 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2007
Location: hasting,
MN
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
need help
I have a super g enfrocer boat and when i run the boat for say 15 20 min . And when i shut the boat off . i can t get the carb to prime up but if i wait 10 to 15 min or when it cools down it will prime just fine. Why is it doing this? thank jim
07-26-2009, 12:21 PM
#3
Senior Member
Thread Starter
Join Date: Apr 2007
Location: hasting,
MN
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
RE: need help
ORIGINAL: halls
I have a super g enfrocer boat and when i run the boat for say 15 20 min . And when i shut the boat off . i can t get the carb to prime up but if i wait 10 to 15 min or when it cools down it will prime just fine. Why is it doing this? thank jim
I have a super g enfrocer boat and when i run the boat for say 15 20 min . And when i shut the boat off . i can t get the carb to prime up but if i wait 10 to 15 min or when it cools down it will prime just fine. Why is it doing this? thank jim
07-26-2009, 11:01 PM
#4
Senior Member
Join Date: Feb 2008
Location: Old Hangtown ,
CA
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
RE: need help
ORIGINAL: halls
ya starting and stoping the boat to fine tune
ORIGINAL: halls
I have a super g enfrocer boat and when i run the boat for say 15 20 min . And when i shut the boat off . i can t get the carb to prime up but if i wait 10 to 15 min or when it cools down it will prime just fine. Why is it doing this? thank jim
I have a super g enfrocer boat and when i run the boat for say 15 20 min . And when i shut the boat off . i can t get the carb to prime up but if i wait 10 to 15 min or when it cools down it will prime just fine. Why is it doing this? thank jim
