gooycheese

That would be awsome if you could send me some prints [email protected] . I dont have lotsa money and I would like to try and build a rigger, but looking into a .21 rigger it will be $500-$700 and I just cant afford that. Thanks


I have a few questions for you, the starter looks alot diffrent than any other Ive seen? why an o-ring? Is the flywheel something special? I see you changed carb from original, any reason why? Good luck and good boating.


Thanks paul

gooycheese

I was looking thru the impba rules for a class for this type of boat. It looks like the motor size makes it a "a" class? Or can this boat even be raced?

Thanks Paul

I am gonna maybe try and race a little boat, it would be nice if this was a race class that i might be able to get into.

Ron Olson

My Feedback: (1)

We're trying to get the class going and a few clubs have used it so far but not enough yet. I got a call from Rod Geraghty last night (I about crapped when I saw my caller ID) and he said that 2 records were broken yesterday in Huntsville in the "A" class and one other was close to being broken.

littlepiston

My Feedback: (12)

im selling my rigger .09 i nned money so best offer starting at 300.00 get is all it wil need is RX and fuel

littlepiston

My Feedback: (12)

well hec http://www.rcuniverse.com/market/ite...634&electric=0

TomMoorehouse

I was just thinking about building one myself!

what mods did you need to make to the engine? I was thinking of getting one or the trinity one? what you think?

thanks
tom

gooycheese

This build is the best !!

What type of collet did you use to attach the flex cable too? What was the opening size for the carb? I am really gonna start building a boat like this one real soon. Please give me some pointers I need to research carbs, any reason why you didnt use what came with the motor? Well good luck with the sell, and good luck and good boating.


Thanks Again Paul

mrfixitwhite

Paul
i think that those engines dont come with a carb -theyre fixed RPM -dont know the term for it sorry! venturi??
just a needle for the fuel mixture- like for control line.
if you click the link that littlepiston put on for Ebay you can see it on there.

Graham

littlepiston

My Feedback: (12)

ok these are the carb they came with the big ones) and theres the carb i used ,, if you look earlier i the thread i posted links to the carbs on tower hobbies


i did not make the cooling head for them either you can see i the pic i posted that the engine came with water cooled heads and big squaire carbs

littlepiston

My Feedback: (12)

page 2 post 46

http://www.rcuniverse.com/forum/m_46...2/key_/tm.htm#

littlepiston

My Feedback: (12)

5mm Threaded to .130 Hex Flex
(Coupler for NITRO Motors) ocfh5mm13

i did not use the carbs that they cam with be cause they were hard to tune and i had and os carb handy and tryed it and worked great ,, never played witht eh carb that the engine came with , again sorry tired

gooycheese

Thanks for all the info as soon as I get the motor i will start figuring out whats what

Thanks again Paul

gooycheese

Hi Littlepiston,

Hope all is going good, I was looking at your hull pic, the one with the yard sticks. It looks like the outside dimensions of the hull are 2 1/2 inches and the inside is about 2 1/4 inches is this correct? Its gonna be atleast 1 more week until I get my motors and was gonna try building the hull before then.


Thanks Paul

simen_93

could you send me a set of the plans? please to email [email protected]

rclover95

My Feedback: (1)

man, those are some insane riggers. if you cant tell im new to the boat world, i got a little MV.