I'm rebuilding a crashed Goldberg Eaglet 50 for a friend and need to know the throws for the elevator, rudder, and ailerons. Does any one have the plans for an Eaglet 50 and could you let me know what the throws are? Thanks for any help.

I just built one of these in Febuary. I had put L.E.D lights in it to fly at our night flys. Flies great & is well lit with 267 lites on board. The throws are as follows; rudder = 1/2" right & left from center, elevator = 1/4" up & down from level, & the ailrons are 1/8" up & down fron level. Bill

You can also see values of incidences and CG location at:

http://www.carlgoldbergproducts.com/.../gpma0961.html

Thanks for the info. I'll get her set up and my friend can try it again.