3250 Spinner Problems
09-24-2002 | 01:07 AM
#1
Thread Starter
Member
Joined: Apr 2002
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
From: Spring,
TX
3250 Spinner Problems
Got my 3250 ticking like a clock. Now the only problem is that the 3" spinner keeps coming loose. I've used both plastic and aluminum backplated spinners. Seems like the 18/8 props just do not grab onto the backplate well enough. Any ideas?
09-24-2002 | 02:08 PM
#2
My Feedback: (11)
3250 Spinner Problems
JRM,
You might want to roughen the center of the spinner backplate so that it will grip the prop better. That's about the only solution we can offer.
We hope you find this information helpful. Should you have any further questions or concerns, please do not hesitate to contact us at this email address. (Please be sure to copy all previous emails into any future questions.)
DID YOU KNOW that our web pages now all contain FAQs? (Frequently asked questions) Please drop by and take a look! We hope you'll find the information helpful and valuable to you.
Sincerely,
Bill Baxter, Manager
Hobby Services
1610 Interstate Dr.
Champaign, IL 61822
USA
Phone: 217 398-0007
Fax: 217 398-7721
Email: [email protected]
Web: http://www.bestrc.com
You might want to roughen the center of the spinner backplate so that it will grip the prop better. That's about the only solution we can offer.
We hope you find this information helpful. Should you have any further questions or concerns, please do not hesitate to contact us at this email address. (Please be sure to copy all previous emails into any future questions.)
DID YOU KNOW that our web pages now all contain FAQs? (Frequently asked questions) Please drop by and take a look! We hope you'll find the information helpful and valuable to you.
Sincerely,
Bill Baxter, Manager
Hobby Services
1610 Interstate Dr.
Champaign, IL 61822
USA
Phone: 217 398-0007
Fax: 217 398-7721
Email: [email protected]
Web: http://www.bestrc.com
