Me Again. OK The HH mode is off and head speed comes up and I am holding the rudder steady and just before liftoff the heli pitches nose up a little spins clockwise and the horiz stablizer gets stuck on the rug and the tail rotor asmb torqs and moves on the tube. If it didnt move it would break. Yes it is tight with good align tools. I am stumped.

Make sure your gyro is not reversed[8D]

Endeavor said it best........ Your gyro is more than likely reversed....... Been there.

got csm gyro hh cant get heli to lock in not holding just goes in circles. using jr 378 heli radio.

[email protected]

AHHA!! Just like me! I just fixed mine thanks to this forum and the nice people on it. YOur gyro is reversed. Mine was and I had the same. BUT WAit there's more after I reversed my gyro the heli was still responding in reverse to the stick so I had to reverse the xmitr also now all is good. So Mine is gryo reversed and transmit reversed also to make it right. I had to center my servo throw also by moving the mount back on the tube. Works great.