zdz50
10-18-2002, 08:53 PM
#1
Senior Member
Thread Starter
zdz50
22x10 MenzS--6400--6800- depending on exhaust setep.
Engine new -not flown . just 1/2
hr of bench running and testing etc..
muflers used - open ended header and VTech can set at 23" from piston to reflector.
Engine new -not flown . just 1/2
hr of bench running and testing etc..
muflers used - open ended header and VTech can set at 23" from piston to reflector.
