dag46

Anyone know where the center of gravity is on a Hangar 9 cap33.

Robotech

My Feedback: (9)

The 33% ?

dag46

Yes it is the 33% 1/3 scale dave

krayzc-RCU

My Feedback: (31)

using a CG machine its 7 inches at the root inverted balance

dag46

Thanks krayzc how well does this plane fly with a GT 80

krayzc-RCU

My Feedback: (31)

i would opt for more power over that powerplant for my needs. I do not know how u like to fly or have your planes powered. The 85 powerplant can fly the plane on unlimted uplines at 3/4 throttle for unlimted verticle. I have the 2nd version caps that Mike releasesd and it came in at 21.5 lbs with carbon goodies and 22 lbs when the cabon landing gear had to be replaced back to the orginal gear for delamition reasons. This cap is the best flying cap out there in this size range. very stable in all aspects fo 3d and imac very well with a rudder to elevator mix.....

Andrew_S

My Feedback: (12)

Im reading the manual and it says 4 1/2 - 5 3/4 from the leaading edge at the tip....If you want the manual, I can send it to u. I dont have the plane any longer and it's sittin here collecting dust....drop me a pm if u want it.........

krayzc

by now he should be flying that beast