Adjustable prop
01-26-2003 | 08:09 PM
#1
Thread Starter
Junior Member
Joined: Nov 2002
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
From: Hjörring, DC, DENMARK
Adjustable prop
Does anyone here know of any homemade adjustable pitch prop.
I just started today making a 3 blade from my own drawings, but I am wery interested in pictures or even drawings of any kind conserning this subject. The masterblade is already finished as you can see. I am making the prototype 32" * (5 - 15")
I just started today making a 3 blade from my own drawings, but I am wery interested in pictures or even drawings of any kind conserning this subject. The masterblade is already finished as you can see. I am making the prototype 32" * (5 - 15")
01-27-2003 | 03:19 AM
#2
Senior Member
My Feedback: (18)
Joined: Oct 2002
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
From: Farmington,
MO
Adjustable prop
Check this out.. 
There is also a 14 page thread on a cap that a guy made into a turbo prop. You can check it out here. I am sure if you also talk to MEC he will be able to give you all kinds of help.
Here is the thread http://www.rcuniverse.com/showthread...ight=aerobatic]
There is also a 14 page thread on a cap that a guy made into a turbo prop. You can check it out here. I am sure if you also talk to MEC he will be able to give you all kinds of help.
Here is the thread http://www.rcuniverse.com/showthread...ight=aerobatic]
