JRozman-delete

My Feedback: (2)

Where is the best source for hex/allen head nylon bolts?

Scorpionjack

V1
Here you go:

http://www.microfasteners.com/catalog/products/NYL.cfm

Ed Smith

I went to the Microfastener site. They do not sell bolts, only screws!!!

Ed S

fredscz

My Feedback: (47)

See Du-bro cat # 142 1/4 X 2" Nylon Wing Bolts
You can also use an allen wrench on these.

The local Tru- value hardware and Lowe's stocks the smaller sizes but most are pan head.

FEB

Scorpionjack

Ed the Button head are Allen style, they also fit flush like a Pan head. I take it your using these for Wing hold downs?

JRozman-delete

My Feedback: (2)

Thanks for the replies. Good source scorpion. I am looking for a head you can use a hex key or wrench on. It is for a cowl on a 29% edge. I am looking for white ones.

Fred, those are exactly what I am looking for, but in white. Picky picky, I know.

Rodney

Ed, I buy the nylon bolts from Microfastners all the time, they have quite a complete stock from 2-56 up thru 1/4-20.

JRozman-delete

My Feedback: (2)

Scorpion, I ordered some of the button heads. I think they will be perfect for the job. Thanks for the info.

Jess

chilie

I buy all my hardware (scews, bolts, etc.) from

http://rtlfasteners.com/RC/a.html

They have a great selection of hardware. I recommend getting some of their servo screws. They work great.
I just bought a bunch of nylon bolts that have socket heads on them. No longer will I punch through my covering when the screw driver slips.

bigdarylg

home depot has a decent supply of nylon bolts also

DavidAgar

My Feedback: (108)

I go to my local Wilco Hardware store in the nuts and bolts department and they have nylon bolts from 4/40 to 1/4 inch. They are pretty easy on the wallet as well. Good Luck, Dave

riond

MAC's up North carries them in the upholstrey area. They carry the nylon bolts and nylon washers. Priced close too the others listed here but no shipping costs but tax.

bkdavy

My Feedback: (1)

Try Mcmaster-Carr (http://www.mcmaster.com)

do a search for nylon screws.

You'll find just about anything you need, for a reasonable price ($5-$10 for a pack of 100).

Brad

lilhachet

My Feedback: (2)

RTL, has the best prices and a great selection.I use their socket head screws for servo monting all the tine now