Rustoleum paint over plastic film.
04-16-2007 | 02:55 PM
#1
Thread Starter
Senior Member
My Feedback: (2)
Joined: Aug 2003
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
From: Blythewood,
SC
Rustoleum paint over plastic film.
Hi all,
I have read from elsewhere on RCU that the Rustoleum brand paint stick well over prepared plastic film when compared to other brands. I usually use Createx Auto Air over film with excellent results but I am tired of keep cleaning clogged airbrush. I tried Krylon (Fusion for plastic) but the bond is extremely weak. Testors can are expensive and Lustercoat takes too long to dry. Please advise. I am planning to paint my GP Fokker DVII in all white scheme. DP
I have read from elsewhere on RCU that the Rustoleum brand paint stick well over prepared plastic film when compared to other brands. I usually use Createx Auto Air over film with excellent results but I am tired of keep cleaning clogged airbrush. I tried Krylon (Fusion for plastic) but the bond is extremely weak. Testors can are expensive and Lustercoat takes too long to dry. Please advise. I am planning to paint my GP Fokker DVII in all white scheme. DP
04-16-2007 | 07:07 PM
#2
Senior Member
My Feedback: (20)
Joined: Oct 2002
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
From: Ashtabula ,
OH
RE: Rustoleum paint over plastic film.
ORIGINAL: Dai Phan
Hi all,
I have read from elsewhere on RCU that the Rustoleum brand paint stick well over prepared plastic film when compared to other brands. I usually use Createx Auto Air over film with excellent results but I am tired of keep cleaning clogged airbrush. I tried Krylon (Fusion for plastic) but the bond is extremely weak. Testors can are expensive and Lustercoat takes too long to dry. Please advise. I am planning to paint my GP Fokker DVII in all white scheme. DP
Hi all,
I have read from elsewhere on RCU that the Rustoleum brand paint stick well over prepared plastic film when compared to other brands. I usually use Createx Auto Air over film with excellent results but I am tired of keep cleaning clogged airbrush. I tried Krylon (Fusion for plastic) but the bond is extremely weak. Testors can are expensive and Lustercoat takes too long to dry. Please advise. I am planning to paint my GP Fokker DVII in all white scheme. DP
I use nothing but Auto Air for painting, both with a airbrush and a full size gun with no problems. Are you thinning it for airbrush use. I sometimes thin up to 50% depending on my tip size. I haven't had a tip clog at all. Can't answer your question about Rost-o since I don't use it.
Rick Check this out: www.autoaircolors.com
