Awesome monokote Flame eagle!
02-24-2002 | 05:59 AM
#1
Thread Starter
My Feedback: (22)
Joined: Jan 2002
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
From: Texas TX
Awesome monokote Flame eagle!
I was fiddling around one boring Sunday afternoon, and managed to come up with a great looking monokoe decal. I think I should share this! See the picture? I'll tell you how to do it:
-Draw a sketch of the flaming Eagle you want to get. Cut it out.
-Cut the same sketch out of several monokote colors. I used white,red,orange,yellow.
-Cut a peice of wax paper out, Place the flames on the paper, one over the other, staggering each color so you can see them.
-Heat the monokote on the wax paper till they adhere to each other.
-Cut out the Eagle head and beak, apply to front of flame, and heat.
-Do whatever for the eye, I cut out a a tall triangle from grey for the eyes, Looks cool!
Someone do one and let me see how it turned out!!! Good luck!
-Draw a sketch of the flaming Eagle you want to get. Cut it out.
-Cut the same sketch out of several monokote colors. I used white,red,orange,yellow.
-Cut a peice of wax paper out, Place the flames on the paper, one over the other, staggering each color so you can see them.
-Heat the monokote on the wax paper till they adhere to each other.
-Cut out the Eagle head and beak, apply to front of flame, and heat.
-Do whatever for the eye, I cut out a a tall triangle from grey for the eyes, Looks cool!
Someone do one and let me see how it turned out!!! Good luck!
02-25-2002 | 01:16 AM
#4
Thread Starter
My Feedback: (22)
Joined: Jan 2002
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
From: Texas TX
Awesome monokote Flame eagle!
Nope, too small for the Edge, I'd need one 6 times bigger, This decal is only 6 inches long. 
The DA 100 on glow is only an idea at this point, I need to find out more before I decide.... Thanks
The DA 100 on glow is only an idea at this point, I need to find out more before I decide.... Thanks
