Go Back  RCU Forums > RC Airplanes > Tips & Techniques
8' Solid Worksurface? >

8' Solid Worksurface?

Community
Search
Notices
Tips & Techniques Want to share a tip or special technique you have either in the workshop or at the flying field or race track? Post it right here!

8' Solid Worksurface?

Thread Tools
 
Search this Thread
 
Old 10-11-2002 | 11:47 AM
  #1  
Thread Starter
Senior Member
My Feedback: (1)
 
Joined: Jul 2002
Posts: 125
Likes: 0
Received 0 Likes on 0 Posts
From: Euless, TX
Default 8' Solid Worksurface?

Home Depot, aka The Man Store, carries a variety of interior doors that will work fine. I have gone through 3 of their Luan Mahogany doors (hollow core, interior doors). They run less than $30 and are straight and smooth. I usually put ceiling tiles (celotex) on top of the door so I can pin my sticks to it easily. I know some of the guys use drywall, but my old fingers aren't what they used to be, and celotex is much easier on the ancient digits.

Good luck and good building.
Old 10-13-2002 | 11:33 PM
  #2  
My Feedback: (7)
 
Joined: Oct 2002
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
From: Chandler, AZ
Default 8' Solid Worksurface?

[img]i/expressions/face-icon-small-smile.gif[/img]If you want to save some money, try to find Stardust Building Supply. They are a part of Habitat for Humanities. They have used building supplies like kitchen cabinets and doors. I have seen steel doors at the one in Mesa,Az. This is all used so you might have to look at it carefully but you will save a bunch.
Old 10-15-2002 | 12:23 PM
  #3  
Junior Member
 
Joined: Oct 2002
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
From: AR
Default 8' Solid Worksurface?

I got lucky and found a cosmetically damaged interior door at Lowes. They turned down my offer to haul it off for $5, but the manager proposed to sell i4t to me for $5.00. Despite the change of furtune, I accepted his proposal.

Undamaged, it was a $35 door (hollow core).
Old 10-15-2002 | 04:55 PM
  #4  
Jim Finn's Avatar
Senior Member
My Feedback: (2)
 
Joined: Oct 2002
Posts: 660
Likes: 0
Received 1 Like on 1 Post
From: Lubbock, TX
Default 8' Solid Worksurface?

Usedbit.......you beat me Lowes charged me $15 for two doors! I also use cieling tiles to pin to.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.