i am planning on using this scoops on a project soon. my question is, what would be the best or proper way to duplicate them to have a set for future use ? thanks in advance.
(please disregard first photo, i mistakenly uploaded and dont know how to delete it.)

Make you a plaster mold of them. It the future you can use the plaster mold to vacuum for a new set
Bill B

Or make a mold of the outside from plaster or bondo that you can lay fiberglass into later

In either case, be sure to cover the parts with a releasing compound before making the mold so the mold won't stick to them!

thanks guys, what would i use for the releasing compound ?

There are commercial compounds available. A lot depends on whether you're using bondo, fiberglass, plaster, etc

But you can often get away with vaseline or even a spray coating of Pam

i figured i would try all 3 of yall's suggestions. ill try the spray oil and the vaseline. its a pretty small part. what do yall think about wax ? thanks for the help.

Yup, wax is good too